Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW F10 - initializing used TMS module in HEADLIGHT
06-01-2017, 14:14 PM,
Post: #11
RE: BMW F10 - initializing used TMS module in HEADLIGHT
No it doesn't
I think there is some problem with tms
Quote this message in a reply
12-01-2017, 07:36 AM, (This post was last modified: 12-01-2017, 07:37 AM by temsky740.)
Post: #12
RE: BMW F10 - initializing used TMS module in HEADLIGHT
I tried to change the parameter - no changes. Initialization fails. Tried to change parameters in the FRM - car version , which has these modules - still without result.
Visit this user's website
Quote this message in a reply
14-01-2017, 17:26 PM, (This post was last modified: 14-01-2017, 17:33 PM by mateo549.)
Post: #13
XZBMW  RE: BMW F10 - initializing used TMS module in HEADLIGHT
Hi, i have very similar problem with tms. But in my case i have 1 lamp usa and 1 ece. Left lamp (usa) initializing ok without any problems but right ece lamp cant initialize. Us lamp have led sidemarker and ece not, there is blank space in lamp, so when ista is initializing us headlamp it blinks for a second led sidemarker but in ece lamp ista cant blink sidemarker becouse this lamp doesnt have it. I was trying to code lamp to ece but i dont know how and i dont know is that even possible to have 1 lamp ece and 1 us. Maybe somebody know how to change coding to delete sidemarker from initializing procedure. I turned off sidemarker in both lamps but when ista initializing lamp it still want to turn it on for a second (test).

I updated 2 lamps and frm to same i-level

Ps car is US version and ece lamp is brand new from dealer.
Quote this message in a reply
15-01-2017, 01:10 AM, (This post was last modified: 15-01-2017, 01:11 AM by HestonDiag.)
Post: #14
RE: BMW F10 - initializing used TMS module in HEADLIGHT
I have had an issue trying to program TMS.

I tried to program FEM as TMS is LIN bus slave to FEM and TMS not listed in ISTA-P.

Didn't work so I then tried again full car program and code, and this time it worked fine.
Quote this message in a reply
31-01-2017, 22:01 PM,
Post: #15
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Hello, i have the same problem f10 LCI i put used tms module and angel eyes dont work, ista/d don't want to Initialization becouse is used, i have coded car with ista/p but that doesn't help and i dont have "tms_id_off" but something like this:
[Image: 25qz05z.jpg]
Quote this message in a reply
01-02-2017, 15:40 PM,
Post: #16
RE: BMW F10 - initializing used TMS module in HEADLIGHT
In my car TMS_ID_LINKS same as TMS_ID_RECHTS. CHECK_TMS_ID_OFF is nicht aktiv. Both id must be the same nr. I read on russian forum that some people change TMS ID with tool32.

Setubal-Portugal
Quote this message in a reply
01-02-2017, 19:01 PM,
Post: #17
RE: BMW F10 - initializing used TMS module in HEADLIGHT
TMS_ID_LINKS and TMS_ID_RECHTS are the same parameters, but I do not see the option CHECK_TMS_ID_OFF, and still ista/d don't want to Initialization becouse is used.
Quote this message in a reply
01-02-2017, 19:14 PM, (This post was last modified: 01-02-2017, 19:20 PM by Deimis.)
Post: #18
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Did you change both used TMS module? Did you check TMS inside ? Is it clean, no rust?

Try with tool 32, open frm3.pgr and check tms id and try Initialization. I don't have car to try, but I fink you can try it.

Setubal-Portugal
Quote this message in a reply
01-02-2017, 22:00 PM, (This post was last modified: 02-02-2017, 06:19 AM by zygi898.)
Post: #19
RE: BMW F10 - initializing used TMS module in HEADLIGHT
I changed left headlight and module because it was damaged in an accident, plug and cables are ok.
If both have the same "werte=12,13" ista/d should initialization it?
Tomorrow I will try in tool32
Quote this message in a reply
12-02-2017, 17:37 PM,
Post: #20
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Hello again, in tool32 its option "lessen TMS" when i take it i have TMS RIGHT 1213, TMS LEFT FFFF
Lower is option SCHREIBEN ID TMS LEFT - RIGHT but when i but argumetr 1213 in left i have an error
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Request G30 LCI front headlight wiring diagram Satia 1 103 10-03-2024, 09:09 AM
Last Post: qbek90
XZBMW G30 LCI Headlight socket (plug) part number Satia 0 67 07-03-2024, 16:18 PM
Last Post: Satia
XZBMW ISTA D - identification possible, unable to get status of each module thedafeet 6 242 04-03-2024, 15:25 PM
Last Post: thedafeet
XZBMW Resetting a short circuit fault in a FRM module TIGHTFIN 10 1,142 24-02-2024, 22:29 PM
Last Post: vierchatura
XSMini DSC Module Coding - Error 5DE3 TLG 3 154 24-02-2024, 07:47 AM
Last Post: Stratofortress
XZBMW Used EHC module F01 installation ahmadarifai 2 138 19-02-2024, 12:33 PM
Last Post: ahmadarifai
XZBMW BMW F30 Adaptive Left Headlight goes Left pablito94 7 358 11-02-2024, 23:08 PM
Last Post: pablito94
XZBMW problem with flashing CHAMP2 module (the programming dependencies are not correct) azwgh 17 659 11-02-2024, 19:39 PM
Last Post: azwgh
XZBMW RAM Module Compatibility Search mcrussell 5 307 09-02-2024, 19:18 PM
Last Post: d.martynov
XZBMW F32 High Beam problem - USA Car, EU Headlight BawariaCars 4 275 04-02-2024, 08:00 AM
Last Post: kklobo

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content