[taztheman]

What a brilliant work. Definitely wonderful. i can imagine your proud and satisfied mate.
if you use controllable fan (on/off manual/automatic and fan speed) with display, wow..

Hi mate, I actually purchased a 3 pin fan ( i.e. : one with a tacho input, then realised I had nowhere to wire it in lol, unless I fit a thermocouple somewhere... )

It's simply wired in as 2 wire PC fan, so they run at full speed all the time @ 12v ( measured on PCB as 11.6 ).

It's very fiddly, but you can do this at home easy. Only issue was heatsinks were 10mm high, so I had to file these down to 7mm ( for case clearance ), however you can buy lower profile ones, after I filed down the ones I had !

Yes, I just hope it helps keep my beloved SD alive a bit longer, I'm sure it will.

I'm going to modify my 2nd SD connect also.

BR

I'm hoping this will show others that you can also protect your investment with a few cheap fans & heatsinks