[sullivan2002]

Hi to all

I need to know if I could use my Renault Can Clip with Nissan Consult III that I downloaded here C3P_V62.10.00 and C3P_V64.11.00 to use with my new used car Nissan Qashqai 2013?

Do I have some hope or do I have to buy a new Nissan Consult III interface?
I heard something about it and about passthrough drivers...

Please let me know thanks a lot

Sullivan

[sullivan2002]

Hi to all

I need to know if I could use my Renault Can Clip with Nissan Consult III that I downloaded here C3P_V62.10.00 and C3P_V64.11.00 to use with my new used car Nissan Qashqai 2013?

Do I have some hope or do I have to buy a new Nissan Consult III interface?
I heard something about it and about passthrough drivers...

Please let me know thanks a lot

Sullivan

i use Nissan Concult 3, while there is only nissan software come with the interface, i buy renault software extra

it works with both Nissan and Renault cars

but i think it is risky to start with this hardware, for example, flashing the control unit of the vehicle.

so perhaps, buying a nissan consult 3 and renault can clip 2 in 1 tool should be a better choice

Hi Thanks for answer

I have now a CAN CLIP but I changed my car to Nissan Qashqai. This is the reason to use CAN CLIP just only to read On-board diagnostics Parameter IDs.

I hope to damage nothing

[SCOTT]

Hi to all

I need to know if I could use my Renault Can Clip with Nissan Consult III that I downloaded here C3P_V62.10.00 and C3P_V64.11.00 to use with my new used car Nissan Qashqai 2013?

Do I have some hope or do I have to buy a new Nissan Consult III interface?
I heard something about it and about passthrough drivers...

Please let me know thanks a lot

Sullivan

i use Nissan Concult 3, while there is only nissan software come with the interface, i buy renault software extra

it works with both Nissan and Renault cars

but i think it is risky to start with this hardware, for example, flashing the control unit of the vehicle.

so perhaps, buying a nissan consult 3 and renault can clip 2 in 1 tool should be a better choice

Hi Thanks for answer

I have now a CAN CLIP but I changed my car to Nissan Qashqai. This is the reason to use CAN CLIP just only to read On-board diagnostics Parameter IDs.

I hope to damage nothing

you would be better off selling you clip on ebay or the likes and buying a decent J2534 Device to try with consult 3 plus

even with a decent J2534 Device you probably wont get live parameters, it might not even work for your vehicle, it should but might not, i thought you should be aware of that.

You might think of purchasing something more generic like an autocom or a handheld device .

OH and forget consult 3, it doesn't cover 2013

[Woogie]

I use clip Alliance VI with consult with no problem, only issue can sometimes be drivers install for interface but not hard to manually install

[albertoart22]

Hi!

I would like to ask you something, people...

Is there any decent but cheap J2534 ODB2 Cable for reprogramming my ECU?

I would like to learn about it, but first, I need that cable (maybe with bluetooth or without it), all the cables I'm finding are too expensive...

If someone knows about any of it, could share the link with me?

Thanks in advance!