Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ADVICE for UPA USB
16-01-2017, 13:57 PM,
Post: #1
ADVICE for UPA USB
Hi friends , i would like buy an UPA USB someone can to say me wich is better in this 2 models

red :
https://fr.aliexpress.com/item/DHL-free-...b91e73f9f9

green :
https://fr.aliexpress.com/item/2014-DHL-...fece3c80cf

and after if i buy original (new model) http://www.elrasoft.com/uusps.htm , the UPA usb V1.3 adaptors (chinese) will work on this ?

thank you by advance for your advices
Quote this message in a reply
16-01-2017, 14:11 PM, (This post was last modified: 16-01-2017, 14:12 PM by teerak2uk.)
Post: #2
RE: ADVICE for UPA USB
Original is better with free updates

Yes adaptors will work still
Quote this message in a reply
[+] 2 users say Thank You to teerak2uk for this post
16-01-2017, 14:25 PM,
Post: #3
RE: ADVICE for UPA USB
OK thank but in this time better red or green PCB , i will buy original after
Quote this message in a reply
16-01-2017, 20:03 PM,
Post: #4
RE: ADVICE for UPA USB
(16-01-2017, 14:25 PM)bouizanne Wrote:  OK thank but in this time better red or green PCB , i will buy original after

Buy red one mate..this one works with all 1.2 and 1.3r2..green will be cleaned(erased) if you dont install corect soft + drivers
Quote this message in a reply
[+] 2 users say Thank You to rs@chip for this post
16-01-2017, 20:21 PM,
Post: #5
ADVICE for UPA USB
[/quote]
and after if i buy original (new model) http://www.elrasoft.com/uusps.htm , the UPA usb V1.3 adaptors (chinese) will work on this ?

thank you by advance for your advices
[/quote]


Yes it will work


Sent from my iPhone using Tapatalk
Quote this message in a reply
[+] 2 users say Thank You to mikroel for this post
16-01-2017, 20:29 PM,
Post: #6
RE: ADVICE for UPA USB
Works also the scripts from here and other forum on original ?
Quote this message in a reply
[+] 2 users say Thank You to autoraedarum for this post
17-01-2017, 12:29 PM, (This post was last modified: 17-01-2017, 12:32 PM by bouizanne.)
Post: #7
RE: ADVICE for UPA USB
(16-01-2017, 20:03 PM)alex.eobd2 Wrote:  
(16-01-2017, 14:25 PM)bouizanne Wrote:  OK thank but in this time better red or green PCB , i will buy original after

Buy red one mate..this one works with all 1.2 and 1.3r2..green will be cleaned(erased) if you dont install corect soft + drivers

Hi friend thank for reply , i buy the green for the 21 adaptors ( NEC + TMS) , with red it's other adaptors i think it's old adaptor (?) and only 19 adaptors not the NEC and TMS adaptor , and what's will be erased ? 24C128 ?

(16-01-2017, 20:29 PM)autoraedarum Wrote:  Works also the scripts from here and other forum on original ?

Good question , i think yes , it's not software ,just script , but it's better wait someone with experience say this
Quote this message in a reply
17-01-2017, 13:51 PM, (This post was last modified: 17-01-2017, 13:52 PM by mikroel.)
Post: #8
ADVICE for UPA USB
Depend which scripts. Not all scripts work with clone nor with ori.Some works some not.


Sent from my iPhone using Tapatalk
Quote this message in a reply
[+] 4 users say Thank You to mikroel for this post
21-01-2017, 14:31 PM,
Post: #9
RE: ADVICE for UPA USB
Hi thank you friends , i receive my upa , install and activation is ok , my upa is recognized by software , but i have 2 test failed in part 5V test , TEST20 and TEST3 failed ,

Test3: P1=9V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=9,33V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
P1(9,33V ) not in 8,70V - 9,30V
Test Failed

---------------------------------------------------------------------------------------------------------------
Test20: P1=0V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=5V
Result: P1=0,00V, P2=4,04V (L), P3=0,00V (L), P4=0,00V (L),P6=4,14V (L), P7=0,00V (L), P8=0,00V (L), P9=5,03V
P2(4,04V ) not in 3,00V - 4,00V
P6(4,14V ) not in 3,00V - 4,00V
Test Failed

all other test passed ,i was make this test in 12mA and with USB power and with 12v power same result , voltage is little over MAX

When i make hardware test in 1mA i was 7 test failed voltage is little below MIN

i put my result test if some can help me to repair it
thank you by advance

My UPA hardware test 2 failed (12mA).txt
File Type: .txt
Downloaded: 16 times
Size: 4.61 KB



My UPA hardware test 7 failed (1mA).txt
File Type: .txt
Downloaded: 5 times
Size: 4.78 KB

Quote this message in a reply
22-01-2017, 11:12 AM, (This post was last modified: 22-01-2017, 11:26 AM by dil6222.)
Post: #10
RE: ADVICE for UPA USB
(21-01-2017, 14:31 PM)bouizanne Wrote:  Hi thank you friends , i receive my upa , install and activation is ok , my upa is recognized by software , but i have 2 test failed in part 5V test , TEST20 and TEST3 failed ,

Test3: P1=9V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=9,33V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
P1(9,33V ) not in 8,70V - 9,30V
Test Failed

---------------------------------------------------------------------------------------------------------------
Test20: P1=0V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=5V
Result: P1=0,00V, P2=4,04V (L), P3=0,00V (L), P4=0,00V (L),P6=4,14V (L), P7=0,00V (L), P8=0,00V (L), P9=5,03V
P2(4,04V ) not in 3,00V - 4,00V
P6(4,14V ) not in 3,00V - 4,00V
Test Failed

all other test passed ,i was make this test in 12mA and with USB power and with 12v power same result , voltage is little over MAX

When i make hardware test in 1mA i was 7 test failed voltage is little below MIN

i put my result test if some can help me to repair it
thank you by advance
hello there did you change voltage jumper during test?
as that is 3.5v/5v when you open/close the jumper let me know smile

under If mine or others posts and info are helpful please give thanks/rep smile yes
Quote this message in a reply
[+] 2 users say Thank You to dil6222 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Advice to Clone IAW 5NR.C2 kos222 5 1,118 23-04-2023, 12:57 PM
Last Post: Ihlberg82
  Advice on Kessy Continental 3d0909139d swap 12manux 8 2,813 02-03-2023, 23:18 PM
Last Post: rezt
  Advice for which remote key hardware Willinickersen 2 412 05-09-2019, 02:00 AM
Last Post: Willinickersen
  NEED SOME ADVICE- VVDI Key Tools or VVDI Mini Key Tool Lanefi 4 826 15-08-2019, 20:48 PM
Last Post: Lanefi
ZVW VAG Simos 06B906033 advice needed ... pawel7924 0 574 26-07-2019, 18:45 PM
Last Post: pawel7924
ORenult Need some Renault expert advice (Modus pin or isk code) tronico 1 524 06-06-2019, 10:45 AM
Last Post: tigre
  advice bosch me9.7 ecu salliemohamed 1 443 27-04-2019, 09:07 AM
Last Post: ka_rai
KVauxhall carprog 8 vs 10 advice alanans 7 1,022 08-04-2019, 12:52 PM
Last Post: keyzex
  advice please on mercedes w204 ezs and ecu salliemohamed 1 536 02-04-2019, 21:44 PM
Last Post: Ecutech
  Solved ✔ please help advice bmw frm3 module salliemohamed 5 1,481 20-03-2019, 09:57 AM
Last Post: salliemohamed

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content