[siuball]

MY car type is BMW 2006 E90 330i,then i use ncs to vo/fa *spbr,then ncs have this problem ,can't fa_write...help

[Bimmer540]

FSW_PSW.man empty?

Or if missing, Create a file called FSW_PSW.MAN in the following directory:
C: \ NCSEXPER \ WORK \

Is the Latency Timer (msec) set to 1 from usb port?

Latest SP-Daten?

[siuball]

FSW_PSW.man empty?

Or if missing, Create a file called FSW_PSW.MAN in the following directory:
C: \ NCSEXPER \ WORK \

Is the Latency Timer (msec) set to 1 from usb port?

Latest SP-Daten?

FSW_PSW.man is empty

usb is set 1 ms

sp-daten v57

[Bimmer540]

FSW_PSW.man empty?

Or if missing, Create a file called FSW_PSW.MAN in the following directory:
C: \ NCSEXPER \ WORK \

Is the Latency Timer (msec) set to 1 from usb port?

Latest SP-Daten?

FSW_PSW.man is empty

usb is set 1 ms

sp-daten v57

Try sp-daten from 3.60.3

[siuball]

FSW_PSW.man empty?

Or if missing, Create a file called FSW_PSW.MAN in the following directory:
C: \ NCSEXPER \ WORK \

Is the Latency Timer (msec) set to 1 from usb port?

Latest SP-Daten?

FSW_PSW.man is empty

usb is set 1 ms

sp-daten v57

Try sp-daten from 3.60.3

ok,thz,i take the spdaten v60 "SPDATEN60\E89\DATEN" copy to "C:\NCSEXPER\DATEN" is ok??

then my car type is e90,enter is "*SPBR" is Correct?
because i enter in "$2NH" is error ,it said un...-1 and un...-2

[Bimmer540]

BMW NCS Coding tool update sp daten:

[siuball]

I hv to updata spdaten 60.after same the problem,my cas is break?

---

I hv to updata spdaten 60.after same the problem,my cas is break?

I use to sg_ret and sg_cod.. is not error,but use to fa_write is error

[SweetBMW]

It's +SPBR. Not *

[siuball]

It's +SPBR. Not *

Thank you,i success to enter "+SPBR" in vo and fa_write cas,then next step what should i do to code m performance brake (front:6pot rear:2pot gold m brake system) in my car e90 2006 330?

[SweetBMW]

After doing fa_:write you choose the dsc module and do the job sg_codieren.