Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ETKA 8 [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
21-01-2017, 09:47 AM, (This post was last modified: 14-10-2018, 11:28 AM by planet-fireball.)
Post: #1
ETKA 8 [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
This thread is no longer supported, from now on for information purposes only.

ETKA 8 - Elektronischer Ersatzteilekatalog / Electronic Parts Catalogue
This is a full version of the Original VW/SEAT/SKODA/AUDI Electronic Parts Catalogue including the latest updates,
which you can install native or virtual [VM] on every Windows 7/8/10 32Bit System.

[Image: DyzWHQL.jpg]

This is the latest ETKA 7.5 Release including the ETKA 8 Upgrade and a Data Updater to keep you up-to-date.

Ask for Password on [Image: postbit_pm.gif] after you have given REPUTATION +1 [Image: postbit_reputation.gif] and [Image: postbit_thx.gif] to this post.

I am not online 24/7 so after PM for password be patient!


Please read the following instructions carefully !

Installation Instructions:
1. Download all .rar Files, extract it and start ETK75P_v2017.exe
The Installation Wizard will guide you through the installation.
Needed Files in the attached link: ETKA75_Germany_International_2017.part01-15.rar

Use WINRAR or 7-ZIP to decompress the Files or you'll get "Wrong Password" Error !

[Image: 6iVltOQ.png]

[Image: cKtj4Po.png]

[Image: wd76oSu.png]

2. The Install Password (not archives password) is: [email protected]
Note: Please type in the password manually, the setup doesn't like Copy & Paste.

[Image: NfrHp5v.png]

3. The install process continues with the necessary Hardlock Driver Installation.

[Image: 5CO7f41.png]

4. The System will be restarted automatically, if not please do it manually.

5. Before you start ETKA
Run the Patch ETK75P-PATCH-INT.EXE after installing ETKA 7.5 PLUS International
or
Run the Patch ETK75P-PATCH-GER.EXE after installing ETKA 7.5 PLUS Germany

6. YOUR ETKA 7.5 PLUS IS READY ! - but outdated

7. Now we have to install the Updates
We will need Update State 1185-711-717-1185 for upgrading to ETKA 8

If you have installed the Germany version, download the Germany Updates
file, unpack it and install the updates one by one in ascending order.
Wait until you start the next update until the previous update is finished.
Needed Files in the attached link: ETKA75_Germany_Updates_2017.rar

If you have installed the International version, download the International Updates
file, unpack it and install the updates one by one in ascending order.
Wait until you start the next update until the previous update is finished.
Needed Files in the attached link: ETKA75_International_Updates_2017.rar

Don't try to abbreviate or you can start from scratch !

8. Make sure you have the Update State 1185-711-717-1185, you can
see the actual state at the bottom line on the start page of ETKA 7.5,
by clicking on the brands the state of the respective make is shown.

9. We are ready for the ETKA8 Upgrade now.
Run the Upgrade ETK8-UPGRADE-1186-712-718-1186.EXE from the
ETKA8_Germany_Upgrade_2017.rar archive for the Germany Version.
or
Run the Upgrade ETK8-UPGRADE-1186-712-718-1186.EXE from the  
ETKA8_International_Upgrade_2017.rar archive for the International Version.

10. YOUR ETKA 8 IS READY !

11. To keep you installation up-to-date you can use the ETKA Updater - start etka updates v1.8.exe
The Updater will always download the latest updates. After Downloading you have to
start ETKA and follow the update process. Needed File in the attached link: ETKA Updater.rar

Ask for Password on [Image: postbit_pm.gif] after you have given REPUTATION +1 [Image: postbit_reputation.gif] and [Image: postbit_thx.gif] to this post.

FAQ:
Can it be installed on 32Bit and 64Bit Systems ?
It can be installed Native only on 32Bit Systems, if you have a 64Bit System please use
a Virtual Machine (e.g. VMWare) with an installed 32Bit System.

What are the Installation Requirements for this program ?
- Full Admin Rights
- 15GB free disk space
- NET Framework 2.0 or 4.0
- Deactivated Windows Defender / Anti-Virus & Deactivated Firewall
- Index for fast file search

How to set up Country Specific Settings ?
You will find the Instructions in the "Country-Specific Settings.pdf" in the install folder.


This thread is no longer supported, from now on for information purposes only.
Reputation: +323 - volavka [+2] , murto [+1] , waiapasi2006 [+1] , Joe2 [+1] , leeoprototype [+1] , muhammadraza [+1] , predacon [+1] , tomaszp [+1] , DoZe [+1] , projektilski [+1] , Jartsa [+1] , wangtianlong [+1] , alfons37 [+1] , petkowo [+1] , ghost0485 [+1] , olito [+1] , pacomasi [+1] , choijungsam [+1] , dodo_ridha [+1] , crackos20 [+1] , benj04 [+1] , kooper [+1] , bazsi84 [+1] , Kees B [+1] , edtech [+1] , diagdata [+1] , istvan31 [+1] , peter86 [+1] , opp0927 [+1] , miarcin [+1] , bmwcare [+1] , Patch [+1] , ototest [+1] , ristici [+1] , sakroda [+1] , driver543 [+1] , Michel R32 [+1] , DD3 [+1] , moiloon [+1] , tylenol [+1] , martin122 [+1] , ATC [+1] , rezis [+1] , teerak2uk [+1] , 23Andi23 [+1] , ries [+1] , erikredhead [+1] , tu329 [+1] , Clarence Worley [+1] , Alpha9098 [+1] , sandor1987 [+1] , gaintp [+1] , aammjj [+1] , t1tan1 [+1] , amaff [+1] , MarcinOslo [+1] , pbrotea [+1] , PopDog [+1] , Enriquez [+1] , relax1980 [+1] , yuejiqi [+1] , kingauto [+1] , alpaslanyasar [+1] , DingoKG [+1] , hercaim38 [+1] , aprietatuercas1974 [+1] , DIAGNOSTICPRO [+1] , kreativ [+1] , Silverstarr [+1] , gsmtronica [+1] , sorin1975 [+1] , long3999502 [+1] , autocar15 [+1] , lixuan [+1] , H4mm3R [+1] , classexa [+1] , belkor [+1] , misterrob [+1] , titou43 [+1] , Mr.Nobody [+1] , Johny [+1] , sebbe76 [+1] , smlee747 [+1] , nama [+1] , ping6666 [+1] , lclerc69 [+1] , guennaroques [+1] , jrl [+1] , KAFER [+1] , Jono [+1] , huhkis25 [+1] , djalix [+1] , vierchatura [+1] , BMWholic [+1] , eltoke [+1] , kwork [+1] , wheet [+1] , atak [+1] , Jeevs [+1] , ToMiBoY [+1] , mbedv [+1] , wamba [+1] , Halamis [+1] , relidan [+1] , vwdamian [+1] , werner5395 [+1] , Turox [+1] , mkii [+1] , memuber [+1] , goldwing [+1] , locarno [+1] , roanoke [+1] , spider80 [+1] , dj_mixalis [+1] , audi rs4 76 [+1] , flashgorden2010 [+1] , VAGstuff [+1] , ljzwxe [+1] , porsche911gtr [+1] , jagpurr [+1] , rafal142 [+1] , Rhun [+1] , superjimmy7 [+1] , raccii [+1] , kastanka [+1] , txalkie [+1] , jackwww [+1] , KrAzYtHeBoY [+1] , dachCAR [+1] , fjphil2000 [+1] , florinyes [+1] , lucifer74 [+1] , sottopiombo [+1] , eduardinidini [+1] , tito-sainz [+1] , Pedro7 [+1] , Un_known [+1] , lgt [+1] , unclassified [+1] , razzo [+1] , et780819 [+1] , 232426 [+1] , onyx4 [+1] , yomgui [+1] , tester2009 [+1] , andredalmolin [+1] , kantusjack [+1] , skinova [+1] , 2Cr4zy [+1] , drjb [+1] , Tommy.Z [+1] , schnurzelpiep [+1] , georgia55 [+1] , slackers [+1] , molfort [+1] , pepeEL [+1] , autosh [+1] , galiano [+1] , yang3113 [+1] , spyderboyant [+1] , hrdinavelikynew [+1] , blokers77 [+1] , zecca [+1] , poseben [+1] , audimees [+1] , advanced [+1] , ROD-BENDERS [+1] , zhakuqinglong [+1] , edz [+1] , miido [+1] , hybridr [+1] , chrisr950 [+1] , james liang [+1] , Zocker010 [+1] , blacktoy [+1] , Wizen [+1] , JonhUSA [+1] , andreamap [+1] , sportdiff [+1] , bedrock [+1] , oscar89 [+1] , 19ghost66 [+1] , carschrauber [+1] , volkangsm [+1] , kamold [+1] , Spackon [+1] , chang2 [+1] , ljs11 [+1] , cosmin1993 [+1] , digital24 [+1] , zuzana [+1] , knuffe [+1] , sraj [+1] , TriStar_Qatar [+1] , worldbenz2015 [+1] , ircpoLice [+1] , reini1976 [+1] , Raymi [+1] , bieck [+1] , rhys1210 [+1] , Carpediem [+1] , szczetke [+1] , superyijia [+1] , charlesroy88 [+1] , billarisa [+1] , Dau [+1] , david99 [+1] , sbc55 [+1] , deerehunter81 [+1] , ProUniverse [+1] , Tom81 [+1] , vladani [+1] , autobleu [+1] , t-alonso [+1] , capoeira [+1] , Josecarloscbv [+1] , yeil [+1] , ruisoares [+1] , yuvalaha [+1] , kar407 [+1] , chora [+1] , Mr.Tester [+1] , ventacar [+1] , tobes49 [+1] , Demarchi [+1] , vlahdacoroman [+1] , arenasaa [+1] , khan4youuk [+1] , factory_jp [+1] , osis [+1] , metronet [+1] , XSuperMarioX [+1] , elegantguy [+1] , jirkon [+1] , ramses [+1] , czmane2000 [+1] , funworld [0] , ali_vw [+1] , ppsvara [+1] , kregiel [+1] , karmazyn [+1] , terngabac [+1] , pepsitosy [+1] , mipe [+1] , rocdeng [+1] , amazig-7 [+1] , bmsolution [+1] , 2RDAM [+1] , Lufek [+1] , bmwf10 [+1] , renzhig [+1] , Wimpie_MK2_VR6 [+1] , cqheyi [+1] , spoon63 [+1] , Vagstyler24 [+1] , BMW888 [+1] , w001 [+1] , DICKHILL [+1] , ynhhdj [+1] , Majinseed [+1] , ricky16 [+1] , vlad33 [+1] , stensyto [+1] , urmerc [+1] , cjhsiao [+1] , jeffreyh1992 [+1] , ykntr [+1] , Maxis [+1] , masinac18208 [+1] , NinjaRey [+1] , steamship [+1] , M83 [+1] , igkovace [+1] , greg57 [+1] , funstyler [+1] , chelnov [+1] , duss46 [+1] , SpeedTec [+1] , Oski [+1] , Dtype [+1] , kiranabc [+1] , totoraga [+1] , bamboo [+1] , redi2000 [+1] , amanorcottage [+1] , MagnaSound [+1] , Grubsche [+1] , pain [+1] , waynex666 [+1] , drjeep [+1] , esmond [+1] , Gingy [+1] , bara001 [+1] , amazingspiderman [+1] , laytonanthony [+1] , Spirit5676 [+1] , stylistic [+1] , Dave1989 [+1] , disinfetor [+1] , dubberdc87 [+1] , Igorka [+1] , rojas [+1] , TechniX [+1] , jackson1703 [+1] , nobbynobbs [+1] , harcan [+1] , alleshateinende [+1] , bmw_e92 [+1] , mower [+1] , Qwaser [+1] , mom2m2004 [+1] , scorpi [+1] , berlin2017 [+1] , DYXiCZ [+1] , sixela [+1] , Red100 [+1] , psalva18 [+1] , dil6222 [+1] , ricar6666 [+1] , becas [+1] , tosi1m [+1] , skyline99 [+1] , bugess [+1]
Quote this message in a reply
[+] 1975 users say Thank You to planet-fireball for this post
24-01-2017, 02:16 AM, (This post was last modified: 24-01-2017, 22:10 PM by espen4001.)
Post: #2
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
Hi! Keeps giving me "Hardlock Api fehler: 38". I have seen this on earlier installations, but I don't remember how I fixed it. Any idea what is the reason and any fix?
I have a new vm in VMware ESXi host, running Win7pro SP1, and tried this 2017-installation and previous 2016-installation. And last I tried another installation from another user. But all gives me the same error.
Disk has MBR.
VMware tools installed, but not until after installation. Is this required before installing?

Edit: Seems this an error related to running ETKA from a remote desktop session. If I open the console directly on vmware-host, ETKA starts fine, but when running over RDP, it gives the same error as before.
Installed teamviewer on client machine to be able to run remotely, and everything works well now.
Reputation: +1 - Igorka [+1]
Quote this message in a reply
[+] 4 users say Thank You to espen4001 for this post
19-02-2017, 14:47 PM,
Post: #3
ZVW  RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates
I have downloaded and installed it,after patched,it works well.
But when I update the database,it can't work and shows a window with Error15 like the attached File.
Does anyone have the same problem,and how can I solve it?
   
Quote this message in a reply
[+] 4 users say Thank You to zalen for this post
27-04-2017, 21:36 PM,
Post: #4
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
Hi,

I am attempting to install this on Windows 10 32bit VM. As per the older version i an seeing Option 1, Option 2 etc. on the installer. Can you please confirm which Options i should be selecting?

Many thanks,

Jeevs
Quote this message in a reply
14-05-2017, 09:16 AM,
Post: #5
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
Hello, one question, this version working ok in windows xp? thank you, dowloading...
Quote this message in a reply
09-07-2017, 14:33 PM,
Post: #6
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
After using etka online updatater today i got this error
price- update UPD_UPDATE_PATH not found (C:\ETKA\PROG\etka_sk.ini)
and UPDATE_KENN (C:\ETKA\PROG\etka_se.ini)
how do i rectify?
thanks
Quote this message in a reply
10-07-2017, 19:33 PM,
Post: #7
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
I don't know if any of you have noticed, but after a recent data update a folder Etka\prog\VIII has appeared. In the folder is an updater. This updates Etka to version 8.0. I have updated my Win7-32bit VMware machine and it works perfectly.
Quote this message in a reply
[+] 6 users say Thank You to 911Turbo for this post
13-07-2017, 09:55 AM, (This post was last modified: 13-07-2017, 10:15 AM by Kees B.)
Post: #8
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Au
quote='911Turbo' pid='257788' dateline='1499715227']
I don't know if any of you have noticed, but after a recent data update a folder Etka\prog\VIII has appeared. In the folder is an updater. This updates Etka to version 8.0. I have updated my Win7-32bit VMware machine and it works perfectly.
[/quote]

Thanks to 911Turbo! According to the instructions you need to update to Etka 8 within 4 weeks after having been notified. After that new data updates will only work on Etka 8. So it seems pretty essential.

I have Etka 7.5 update 1180 running well on a VM with Windows 10-32bits.
When I try to update to Etka 8 I get this error message.
Any ideas?
   
Quote this message in a reply
13-07-2017, 12:02 PM,
Post: #9
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
I've updated both my Win7-32-bit VM, and my Win7-64bit native installations of ETKA 7.5, by running C:\ETKA\PROG\VIII\ETKA_80_Install.exe. Both versions are installed in C:\ETKA. Is yours in the same location?

I updated them both this morning with V1181 - no issues at all.
Quote this message in a reply
13-07-2017, 13:17 PM,
Post: #10
RE: ETKA 7.5 PLUS [Germany + International] v2017 + Latest Updates - VW/Seat/Skoda/Audi
Thanks again.
Yes, same location. I also updated my 7.5 with V1181 just now, and ran the update to 8 again, no luck. Attached is another overall screenprint. Hoping for any guesses....
   
Quote this message in a reply
[+] 7 users say Thank You to Kees B for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Skoda DQ200 sgo sokisoki3 4 32 11 hours ago
Last Post: pupu144
  Seat Ibiza ABS long coding help please! kreepyme 0 37 Yesterday, 12:25 PM
Last Post: kreepyme
ZTAudi Audi A6 2024 seat belt warning deactivate with odis samiralena 3 117 Yesterday, 06:58 AM
Last Post: samiralena
  Audi A3 8V BCM flashing from Index Q to AJ mars2moon 1 60 22-03-2024, 17:23 PM
Last Post: pupu144
ZSeat Seat ibiza abs long coding. vwdamian 1 49 22-03-2024, 15:41 PM
Last Post: kreativ
ZTAudi Audi Dataset editor - Required ahmedmph 3 219 22-03-2024, 11:06 AM
Last Post: PopDog
  Audi A6 3.0 TDI 313hp ECU and TCU flash new version without dieselgate AK_Service 7 266 20-03-2024, 11:56 AM
Last Post: AK_Service
ZSkoda Skoda Octavia ABS Long Coding after Cluster Swap Kayhan 17# 1 87 20-03-2024, 09:29 AM
Last Post: ufo222
ZTAudi Audi DQ500 Abu Ameer 1 73 19-03-2024, 16:33 PM
Last Post: pupu144
ZTAudi Audi a7 c8 zFAS 291 flash help tomtomek 5 125 19-03-2024, 10:47 AM
Last Post: tomtomek

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content