[bmwcare]

Hello,
I've an E60 with a s/h Kombi so the chassis # is mismatch with CAS.
I reprogrammed CAS with WinKFP with matching chassis number of Kombi but dot is still on.
Is there any easy way to get rid of the dot?

Many, many thanks

[osd]

You shouldn't touch CAS.
You should use R270 to virgin kombi.

[bmwcare]

You shouldn't touch CAS.
You should use R270 to virgin kombi.

Thank you.
Will R270 do that via OBD?

[osd]

Check what R270 is.
Of course not.

[dazuc]

Thank you.
Will R270 do that via OBD?

No tool can do so via OBD

[bmwcare]

Thank you.
Will R270 do that via OBD?

No tool can do so via OBD

Is there any tool that will do this with SOHC?
Without removing chip from KOMBI?

Thank you

[maxwell4321]

You can use a 8 pin clip onto the chip but in my experience does not always work, far better to remove the chip from the board

[bmwcare]

You can use a 8 pin clip onto the chip but in my experience does not always work, far better to remove the chip from the board

What tool works sometimes with this method?

[bmwcoder75]

You can use a 8 pin clip onto the chip but in my experience does not always work, far better to remove the chip from the board

What tool works sometimes with this method?

When it fails it fries the chip
R270 cost 40 usd on Aliexpress.
Do the maths