[Node]

This solution is not designed to replace dlls starting with X in ediabas.

I got the same problem as Harrycz44.
It there any way to get the simulated voltage in ISTA+ with ENET cable?

Do you have any good reason for that? It would take time to develop such solution and up till now I don't know of any reason to do that.

I thought for F-series, the ECU upgrade plan generation is allowed only when the voltage is detected in ISTA+. This is not a problem when using ICOM. However, for ENET cable the voltage is unknown without simulation tool.

Don't know about plan, but you will not be able to upgrade using ISTA+ without ICOM anyway. So what's the point of a plan then?

[bimmer71]

did a test yesterday @ work all seems ok only had I car , but voltage seems ok , think the rename for inpa .32dll may have to be set back to normal (original for errors to go away) or ti may just be the "I" car itself overall NICE JOB

[motorberserker]

Don't know about plan, but you will not be able to upgrade using ISTA+ without ICOM anyway. So what's the point of a plan then?

Perhaps it's my misunderstanding...

I've heard that using ISTA/P with launcher and ICOM emulator is possable to do a ECUs upgrade with ENET, so I suppose this scene works on ISTA+.

After all the ICOM is necessary for ISTA+, sorry for my misunderstanding.

[Node]

It was a long time ago I used ICOM emulator so don't know if it works with ISTA. However when you use emulator then the emulator itself should handle informing voltage to ISTA.

[Node]

Support for v4.10.41 added.

[aloxo]

Hi,
I have tried it today with my ista+ 4.10.20 but not success, after that, i have remove all files, restore stock but i have met this problem.

Diaglog show that control unit not connected to power source (it mean that low battery), but K15, K30 is 14v, reset pc, try many times but nothing more.

Any solutions here ?

Thanks

[egyclick]

Hi,
I have tried it today with my ista+ 4.10.20 but not success, after that, i have remove all files, restore stock but i have met this problem.

Diaglog show that control unit not connected to power source (it mean that low battery), but K15, K30 is 14v, reset pc, try many times but nothing more.

Any solutions here ?

Thanks

in other words it tells you the laptop is on battery and you should plug it to charger..

[bimmer71]

I tested w ista+ work ok , when I copied file to inpa folder got error , when I doubled checked as I renamed original first , it somehow changed file type that was my error as I read instrusction , there are 3 types within inpa that need to be changed and only the 1 in ista as well ass adding the 1 within ista



hope this helps

[Node]

Added support for v4.11.22

[luv2vexx]

can someone be helpful via teamviewer to sort out voltage control