[808AWD325xi]

Hi guys,

I made a small utility suite which allows manual control of voltages which Ediabas sees from the interface such as OBD or CAN. It should work for those using any version of INPA, ISTA+ and others as well as it integrates between ediabas and cable driver and is completely transparent to high level software. So all ABLs and other procedures should work flawlessly.

The link to the suite below

Installation instructions:
1. If you are using STD:OBD rename existing obd32.dll to obd32.ebas.dll within Ediabas\Bin folder. For INPA its in C:\Ediabas\Bin, for ISTA+ its in Ediabas\Bin within ISTA+ folder. STD:CAN users do the same with can32.dll -> can32.ebas.dll. I do not have any CAN cable to test myself, so its not tested though.
2. Extract the zip file.
3. Rename NodeEdiabasVoltageControlDll.dll to obd32.dll or can32.dll respectively and copy it to Ediabas\Bin.

Then enjoy the results: to control voltage run the exe from zip which can be placed anywhere you want. If exe application is not started, this software becomes completely transparent and does not influence any readings at all.

System requirements: Visual Studio 2015 x86 runtime must be installed (same as required for last versions of ISTA+).

P.S. This is the first release so please report any bugs. I've tested it as much as I could but I use ICOM myself, so this was more of a curiosity project for me.

Rule 3: Do not Post Links on the Board! External links must be attached in a text file.

Thanks, Admin

Like this

Hi Node,

I tested your program and dll with EDIABAS 7.3.0 from BMW Standard Tools 2.,12 and it didn't work. It caused API errors and no values could be read from the DME:


With the standard dll, the INPA script works fine: