NBT EVO Ugrade from ID4 to ID5

***ruben_17non*** · 12-03-2017, 20:08 PM,

(12-03-2017, 19:59 PM)TomoR Wrote: Can EVO B2xx with ID5 use gps signal from blue fakra gps connector?

Yes. i'm not sure if all B2XX, but i use retrofit EVO B210 and work fine GPS in Nav without Telematik

***TomoR*** · 12-03-2017, 20:13 PM,

(12-03-2017, 20:08 PM)ruben_17non Wrote:
(12-03-2017, 19:59 PM)TomoR Wrote: Can EVO B2xx with ID5 use gps signal from blue fakra gps connector?

Yes. i'm not sure if all B2XX, but i use retrofit EVO B210 and work fine GPS in Nav without Telematik

Ok..thanks.

***jonny81*** · 13-03-2017, 11:03 AM,

(12-03-2017, 19:55 PM)ruben_17non Wrote:
(12-03-2017, 19:47 PM)wolli Wrote: ...HW really does not matter, important HB B2xx for real ID5 device.

Yes you have reason just i look test unit hw2.2 b210 with id5 from "factory" 2014

you know what is EC?
finally b140 to id5, not is recommendable?

The device in the picture is a test device of the G11 with 4GB RAM,

B140 is only provided for id4,
If you flash on id5. From 60.2 run the stable if you IBA deactivated come no reboots.

***TomoR*** · (This post was last modified: 13-03-2017, 12:01 PM by TomoR.)

(13-03-2017, 11:03 AM)jonny81 Wrote:
(12-03-2017, 19:55 PM)ruben_17non Wrote:
(12-03-2017, 19:47 PM)wolli Wrote: ...HW really does not matter, important HB B2xx for real ID5 device.

Yes you have reason just i look test unit hw2.2 b210 with id5 from "factory" 2014

you know what is EC?
finally b140 to id5, not is recommendable?

The device in the picture is a test device of the G11 with 4GB RAM,

B140 is only provided for id4,
If you flash on id5. From 60.2 run the stable if you IBA deactivated come no reboots.

That mean evo hw1.6 b140 flashed with 60.2 on id5 work really normal without any reset with navi on or anything else?Just with IBA off?

***ruben_17non*** · (This post was last modified: 13-03-2017, 12:26 PM by ruben_17non.)

(13-03-2017, 11:03 AM)jonny81 Wrote:
(12-03-2017, 19:55 PM)ruben_17non Wrote:
(12-03-2017, 19:47 PM)wolli Wrote: ...HW really does not matter, important HB B2xx for real ID5 device.

Yes you have reason just i look test unit hw2.2 b210 with id5 from "factory" 2014

you know what is EC?
finally b140 to id5, not is recommendable?

The device in the picture is a test device of the G11 with 4GB RAM,

B140 is only provided for id4,
If you flash on id5. From 60.2 run the stable if you IBA deactivated come no reboots.

Is of Test F26 X4, but same for G11
how disable IBA, only this?

3000 HMI
-IBA to nicht_activ

Thanks

***Jartsa*** · 13-03-2017, 12:28 PM,

There is HW31 unit with B140 which has 4gig of ram. No reboots.

***clode777*** · 14-03-2017, 02:00 AM,

(12-02-2017, 12:55 PM)ingmv Wrote:
(12-02-2017, 11:45 AM)dj-um Wrote: 2 ingmv: you mean on HW2.3 only connected drive services will work bad?
what about the navigation? it will reboot to?

HW 2.3 B140 have the problems with connected drive services and also navigation.

HW 2.3 B240 and HW 3.1 don`t have the problems this system i have retrofit
in my car (HW 2.3 B240).

by the way how do i know my HW version?

***ingmv*** · (This post was last modified: 14-03-2017, 04:17 AM by Clusters.)

Quote:by the way how do i know my HW version?

If you look at the sticker on the NBT Evo (in the frontside) ..

***ir0n87*** · 14-03-2017, 10:27 AM,

Anyone could confirm iba off -> no reboots?

***BhdR*** · 14-03-2017, 11:29 AM,

(14-03-2017, 10:27 AM)ir0n87 Wrote: Anyone could confirm iba off -> no reboots?

Still reboots sad

Contact Us