Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
24-08-2017, 03:30 AM,
Post: #11
|
|||
|
|||
RE: What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
Sometimes you need to lift the reset.
If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
24-08-2017, 03:55 AM,
Post: #12
|
|||
|
|||
RE: What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
|
|||
24-08-2017, 17:56 PM,
Post: #13
|
|||
|
|||
RE: What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
Ok, this is what I found out.
First of all I need to power up the cluster with my power supply, since obviously it's not enough with VCC power from the programmer. Secondly I need to have "EXTAL" (pin 44) wire connected to the programmer. After that I'm able to read/write the EEPROM area of the processor. If I read the "Flash" area of the processor, it still shows all FFs. Is there anything I need to know about the reading of the Flash area? |
|||
24-08-2017, 18:34 PM,
(This post was last modified: 24-08-2017, 18:59 PM by juancho18.)
Post: #14
|
|||
|
|||
RE: What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
Just one thing.
Orange 5 on some mku needs a resistance of 10k. I'm not sure you're far away.. Search with multimetro connections from these points Or use Upa (original-clone) And attachment that you are using wrong pin out of orange5 Reset.... 5v... gnd.... bkgd... upa Rst .... vcc.... gnd....RxD..... Orange5 |
|||
24-08-2017, 21:17 PM,
(This post was last modified: 24-08-2017, 21:20 PM by HETPE3B.)
Post: #15
|
|||
|
|||
What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
(24-08-2017, 18:34 PM)juancho18 Wrote: Just one thing. Thanks! What pin you are thinking I'm using wrong on Orange 5? I was using GND, RXD, RST, VCC. I figures out that I needed to use OSC pin on Orange 5 for Extal Pin on CPU. Eventually I sticked with GND, RxD, OSC and external power supply for the cluster. Works just fine. |
|||
25-08-2017, 00:08 AM,
Post: #16
|
|||
|
|||
RE: What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
Use adaptador..... Or check soldering. Programmer Upa , xprog, other
|
|||
25-08-2017, 04:23 AM,
Post: #17
|
|||
|
|||
What do you use for Nissan Quest 04-06 cluster programming (Motorola MC9S12)?
There are no problems anymore. Orange is working fine so far with adaptor and without.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Nissan NV200 dash | pawel7924 | 4 | 1,365 |
19 minutes ago Last Post: Ecu_Blast |
|
BMW f34 cluster 6wa virgin-retrofit | boweld11 | 1 | 36 |
Yesterday, 13:53 PM Last Post: Ryzen |
|
Megane 3 cluster need Flash backup file | erikas523 | 0 | 18 |
25-04-2024, 19:20 PM Last Post: erikas523 |
|
vito cluster mileage | spoool | 3 | 110 |
24-04-2024, 23:46 PM Last Post: spoool |
|
Need DataFlash and Flash Tiguan 5NA920791C virtual cluster MCU D70F3526 | popov | 2 | 121 |
23-04-2024, 06:38 AM Last Post: popov |
|
Default Volvo XC60 2016 TFT cluster died during X-Tool programming | slevy70 | 1 | 95 |
12-04-2024, 11:32 AM Last Post: repair |
|
LR Discovery 3 - 2008 - IPC Programming | arturjfonseca | 3 | 183 |
12-04-2024, 11:26 AM Last Post: arturjfonseca |
|
Nissan GT-R 93c66 | mialczek | 0 | 64 |
10-04-2024, 20:05 PM Last Post: mialczek |
|
BMW F-Series Cluster Virgin Needed | stealthy88 | 1 | 101 |
05-04-2024, 13:35 PM Last Post: alb3rt |
|
Tiguan 2012 cluster clone. Possible? | Maikiu | 2 | 139 |
02-04-2024, 07:53 AM Last Post: Maikiu |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content