Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P 3.60 error 94201 63014 technical service initialization failed
11-02-2017, 19:12 PM,
Post: #1
XZBMW  ISTA-P 3.60 error 94201 63014 technical service initialization failed
Hi guys,

I have a problem with BMW f10 2013 pre-LCI, I was trying to use ISTA-P to update it today and it gives me attached error right after VIN and SERIES is determined.

I use clone ICOM with the newest firmware.


A fault occured on execution of the measure

94201 Technical service initialization failed
-2 Global unknown
63014 (CASTOR) - Fault when executing a PSdZ function


Code in car
ZGM: central fault memory full - no control-unit fault

Please advice. Thanks in advance.


Attached Files Thumbnail(s)
       
Quote this message in a reply
11-02-2017, 19:37 PM,
Post: #2
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
Sorry cant help and off-topic, but I couldn't help it and notice there is a beaver in your screenshot ?!? is that for real, does ISTA/P display a pic of a beaver (castor) ???

Did you execute test measures for ZGM in ISTA/D to see the suggestions ?
Quote this message in a reply
11-02-2017, 20:16 PM,
Post: #3
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
Got this fault yesterday also, fixed with reboot and disconnecting and reconnecting ICOM. It has happened before also when ista p was not exited correctly or other processes are accessing ediabas. (which is the base for ista)
Quote this message in a reply
11-02-2017, 20:41 PM,
Post: #4
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
(11-02-2017, 19:37 PM)aboulfad Wrote:  Sorry cant help and off-topic, but I couldn't help it and notice there is a beaver in your screenshot ?!? is that for real, does ISTA/P display a pic of a beaver (castor) ???

Did you execute test measures for ZGM in ISTA/D to see the suggestions ?


It'not a beaver, it's a hamster wink.

I did and error has gone. However still have this error. I disconnected icom and restarted laptop but it still doesn't work.
Quote this message in a reply
11-02-2017, 20:44 PM,
Post: #5
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
(11-02-2017, 20:41 PM)pweber84 Wrote:  
(11-02-2017, 19:37 PM)aboulfad Wrote:  Sorry cant help and off-topic, but I couldn't help it and notice there is a beaver in your screenshot ?!? is that for real, does ISTA/P display a pic of a beaver (castor) ???

Did you execute test measures for ZGM in ISTA/D to see the suggestions ?


It'not a beaver, it's a hamster wink.

I did and error has gone. However still have this error. I disconnected icom and restarted laptop but it still doesn't work.

Start task manager and see if any ediabas services are running?
Quote this message in a reply
12-02-2017, 09:48 AM,
Post: #6
XZBMW  RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
EDIABAS service was running.

Today I tried to use ENET cable to check if this works. I use ISTA loader 6.1

And this errors shows up


Attached Files Thumbnail(s)
   
Quote this message in a reply
12-02-2017, 10:12 AM,
Post: #7
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
Quote='pweber84' pid='221618' dateline='1486892882']
EDIABAS service was running.

Today I tried to use ENET cable to check if this works. I use ISTA loader 6.1

And this errors shows up
[/quote]

I'm facing the same problem, any suggestions guys???

I have installed network tool (etc )and the reset of what is required, even if i istall a new fresh windows 7 (32 Bit) as well tried it on Windows 10. at the end, once again after checking i get the same issue rises ????

By the way i was installing ISTA-P 3.59.4.004 including the package

Please can some one who is expert in ISTA / P help us to sort it out !
Quote this message in a reply
12-02-2017, 11:31 AM, (This post was last modified: 12-02-2017, 11:33 AM by Roo.)
Post: #8
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
From my personal experience and the topics I learned, this error occurs only with F-series.
Some people recommends disconnecting battery for 20 mins.
Some people says that it happens due to Windows blocks some ports and restart of the OS may help
etc-etc

I have this problem as well with chinese clone of ICOM.
I think I started facing this problem when something happened to my ICOM. Now its SYSTEM led always flashes with ORANGE (Which indicates kind of a hardware problem. Reflashing doesn't fix it.)
So, my ICOM perfectly works with Rheingold (E- and F-) and ISTA-P (only for E-). And always fails with F-series with the problem we are discussing. I can work with F- thru ISTA-P and ENET cable.

Bottom line: if your ICOM has orange light - it's definitely a hardware problem.
Otherwise there's a chance that disconnecting of a car battery may help. (ZGM sometimes gets overflown and needs reset, reinitialization)
Quote this message in a reply
09-03-2017, 05:09 AM,
Post: #9
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
Turn ignition on for 3 minutes then connect the icom.
Quote this message in a reply
09-03-2017, 05:27 AM,
Post: #10
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
I had a Windows 10 update disable .NET 3.5 framework. After re-enabling, the error no longer appeared when connecting two different F-series with ENET.


Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Lowering g05 lci with ista Zenel6GT 1 8 2 minutes ago
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,655 628,144 26 minutes ago
Last Post: CarlosF11
XZBMW BMW HU SERVICE MANAGER user_530d 117 34,489 2 hours ago
Last Post: NeRkO20
XZBMW BMW Service history by VIN bmt_hr 5,991 486,026 4 hours ago
Last Post: anchess
  ista 4.46 Standalone kiranabc 33 3,152 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 47 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 377 Yesterday, 10:39 AM
Last Post: RaoulK1998
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 22 926 27-03-2024, 22:09 PM
Last Post: ivanp
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,418 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,498 27-03-2024, 10:39 AM
Last Post: MINIGP1610

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content