Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Punto 1.9D Lucas Epic
08-03-2017, 20:36 PM,
(This post was last modified: 12-03-2017, 10:44 AM by pankar.)
Post: #11
|
|||
|
|||
RE: Punto 1.9D Lucas Epic
I give you some info about this problem.
The max and min limits of rotor, stored in different place on fiat and other place on Renault. I thing in photo is for fiat. |
|||
10-03-2017, 18:58 PM,
Post: #12
|
|||
|
|||
RE: Punto 1.9D Lucas Epic
Hi everyone,
pankar: thanks for explaing what I/we actualy doing so for now i am not finished yet, but have some good and some bad progress :/ good is that I soldered programer to eeprom, but it could not read it, guess pins are somehow connected on board, even disconected pump with cable, so i desoldered eeprom, and than I readed it, it works like charm, used that software elmaro posted it, and write it back bud bad is I damaged 3 pads for eeprom, becoase this motherboard is much sensitive than I used on PC's, I could wait for my friend to do it , so I need my friend to trace back pads and put eeprom back, than I guess we can go for beer with car If someone have nice diagram for pads, would save us some time btw, I did cut sensor cable now, and need to rejoin tham to. |
|||
12-03-2017, 10:43 AM,
(This post was last modified: 13-03-2017, 21:35 PM by pankar.)
Post: #13
|
|||
|
|||
RE: Punto 1.9D Lucas Epic
Hi, i found the diagram for pads. I don't now if is correct.
|
|||
19-03-2017, 12:57 PM,
Post: #14
|
|||
|
|||
RE: Punto 1.9D Lucas Epic
Tnx for diagram, my friend soldered it back useing diagram.
I did put everything back, but, it seams to be like before without pedal rpm is around 500, rarely 800 (which is normal) but only for a short period and engine turns off, with full pedal, now is rpm 5000 instead of 4500, but still if depress pedal, engine goes off My battery goes off, coz i started more times for about 30mins, I have personal feeling that its getting slowly better?? Anyway, not sure what to do now :/ |
|||
20-03-2017, 19:57 PM,
Post: #15
|
|||
|
|||
RE: Punto 1.9D Lucas Epic
Still no progress
Uploding here 2 bin files, old and new one, it seams that thay linked to pump, coz serial number of pum is at begining. Friend sugested that we change eeprom for a new one, coz may it happen to getin "old" (to many read/write), seams happen to TV's to, with tham he have experience. I am also readed something about puting some distancer, about 2.5mm, but dont know how to pull out that axle/shaft. |