Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Porsche srs sensor 996.618.219.02
04-02-2014, 18:11 PM,
Post: #1
|
|||
|
|||
Porsche srs sensor 996.618.219.02
Hello my friends
can anyone help me in how to read MCu from this SRS Sensor for porsche 996.618.219.02 the MCU is 68HC11KA4 2E59B MRSZ2 TEMIC or how to pin out i try with XProg and carprog didn't work any clear file for it without crash thanks in advance |
|||
04-02-2014, 19:15 PM,
Post: #2
|
|||
|
|||
RE: Porsche srs sensor 996.618.219.02
Solder direct to pads micro
x prog need put 15.5 volts and try lift pin by pin carprog same 12 v but diferentpinout lift pin |
|||
Reputation: +1 - volavka [+1] | |||
04-02-2014, 19:29 PM,
Post: #3
|
|||
|
|||
RE: Porsche srs sensor 996.618.219.02
Any picture of how to connect in X Prog please because i don't have it on QFP64
|
|||
05-02-2014, 13:00 PM,
Post: #4
|
|||
|
|||
RE: Porsche srs sensor 996.618.219.02
(04-02-2014, 19:15 PM)meroteki Wrote: Solder direct to pads micro is there is any thing to do more the connecting pins to programmer because i connect with Xprog it gives me device is silent help please and thank you in advance |
|||
05-02-2014, 13:12 PM,
Post: #5
|
|||
|
|||
RE: Porsche srs sensor 996.618.219.02
Here have but i no found this mask
in xprog i think you need desolder and put in adaptor plate its possible no read in circuit set oscilator clock to 4000 and remkeber use thanks buttom very important for help others |