Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Corsa d steering wheel calibration fail
21-03-2017, 11:10 AM,
Post: #1
Corsa d steering wheel calibration fail
Hi
I changed streering wheel column but i got error about calibration and i did calibration with tech2 and opcom no success.. tech2 says : "volt has to be range 1,75-2,15 around but my volt is 1.51 that why tech2 can t calibrate..
signal cornering is not close from CIM you have to turn it off manually
I changed steering wheel column for my AFL project..
so eps is second hand maybe it s broken and when you turn left or right CIM does not close the signal if you full turn right or left it closes..
error code is C0460-42 same error tech 2 and opcom..and i had to change with old one..is there a special technique for calibration..by the way my car has not esp function but steering wheel column esp function..
thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
KOpel Corsa d 1.3 cdti will not show the speed on the odometer eelkar 0 21 05-03-2024, 06:50 AM
Last Post: eelkar
KOpel Needle Sweep Corsa D Z14XEP AlpinWeiss2k18 2 676 05-03-2023, 22:53 PM
Last Post: Ampera
  corsa d a12xer need dump for easytronic buca25 0 224 14-02-2023, 17:33 PM
Last Post: buca25
  Insignia 2012 power steering vin change Commander 10 1,514 14-11-2022, 17:27 PM
Last Post: liviu2004
KOpel used Key with remote and Immo for Corsa D Possible? grisu-en 3 654 17-05-2022, 03:14 AM
Last Post: Ampera
KOpel Corsa D steering column 2007-2014 issue sakroda 0 317 13-05-2022, 08:58 AM
Last Post: sakroda
  Vauxhall corsa D 2010 G19aby 2 481 05-05-2022, 23:03 PM
Last Post: hahn181
  Vauxhall Corsa 1.3cdti moriaz 2 459 22-03-2022, 17:03 PM
Last Post: moriaz
  Corsa d no Comms with ecu moriaz 4 985 26-02-2022, 04:55 AM
Last Post: moriaz
KOpel Solved ✔ Corsa C 1.7DTI Cruise Control Retrofit - need help Davidescze 1 1,193 01-06-2019, 19:05 PM
Last Post: Davidescze

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content