Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo

  2. AUTO-CHIPS

  3. Ecu-Service



How to install elm 327 drivers to make it work with multiecuscan
24-03-2017, 14:25 PM,
Post: #11
How to install elm 327 drivers to make it work with multiecuscan
(24-03-2017, 14:07 PM)mattydr67 Wrote:  Mate for Fiat Group car that resistor must not be there. Thats why yoy cannot connect to your car ( if its CAN BUS one )
You have to know ( becuse you don't mention what car do you have ) that to connect in some controlers on k-line you need vagcom kkl but no ELM327
For othet cars you do not need to remive that resistor. ElM327 chinese clones are diffrent then real schematic on CAN BUS and this creat that issue in Fiat Group cars
Good luck

So better is to order vagcom than removing the resistor on elm327, because maybe i will need elm for other cars...?






Sent from my iPhone using Tapatalk
Quote this message in a reply
24-03-2017, 14:43 PM, (This post was last modified: 24-03-2017, 14:43 PM by Zamperl.)
Post: #12
RE: How to install elm 327 drivers to make it work with multiecuscan
Hi,
recently I've installed an ELM327 v1.5a USB cable with Fiat Multiecuscan 3.1 in a VM (Win7-x86).
I used this driver
CH341SER.rar
File Type: .rar
Downloaded: 65 times
Size: 175.09 KB

and changed the COM port to 1-4 in the device manager of Windows. Some programs doesn't like COM ports >4
I run Multiecuscan, setup interface and connected to a Fiat Doblo and everything worked.
Good luck
Reputation: +1 - mjorgji [+1]
Quote this message in a reply
[+] 3 users say Thank You to Zamperl for this post
24-03-2017, 15:59 PM,
Post: #13
How to install elm 327 drivers to make it work with multiecuscan
(24-03-2017, 14:43 PM)Zamperl Wrote:  Hi,
recently I've installed an ELM327 v1.5a USB cable with Fiat Multiecuscan 3.1 in a VM (Win7-x86).
I used this driver and changed the COM port to 1-4 in the device manager of Windows. Some programs doesn't like COM ports >4
I run Multiecuscan, setup interface and connected to a Fiat Doblo and everything worked.
Good luck


Why that driver?

Whats says when u connect the interface in device manager? Can u upload screenshot here?




Sent from my iPhone using Tapatalk
Quote this message in a reply
24-03-2017, 17:42 PM,
Post: #14
How to install elm 327 drivers to make it work with multiecuscan
[Image: 7aac49cddcf1421812ad0faa4b449211.jpg][Image: 457163db95f958d3e9c112987a87dc3a.jpg]

What i have to remove?


Sent from my iPhone using Tapatalk
Quote this message in a reply
24-03-2017, 18:10 PM,
Post: #15
RE: How to install elm 327 drivers to make it work with multiecuscan
(24-03-2017, 14:25 PM)laguna Wrote:  
(24-03-2017, 14:07 PM)mattydr67 Wrote:  Mate for Fiat Group car that resistor must not be there. Thats why yoy cannot connect to your car ( if its CAN BUS one )
You have to know ( becuse you don't mention what car do you have ) that to connect in some controlers on k-line you need vagcom kkl but no ELM327
For othet cars you do not need to remive that resistor. ElM327 chinese clones are diffrent then real schematic on CAN BUS and this creat that issue in Fiat Group cars
Good luck

So better is to order vagcom than removing the resistor on elm327, because maybe i will need elm for other cars...?






Sent from my iPhone using Tapatalk
Mate don't you get it what I said?
The rezistor is on CAN BUS.
If you have it there then remove it. Iyou haven't it so don't. If you remove it it will let you connect on cAN BUS controler in Fiat Group cars. But this will not affect communications in all other brands CAN BUS cars.
The VagCom kkl is for kkl controlers.
Me I haven't see your kind of ELM327. You oics are such a good but take an ohmether and check if between MCP2551 6 AND 7 pins you have a resistor 1kohm or any.
As I can see in your pics ( as I can see ) I haven't seen any resistor but as I said this kind of ELM327 I haven't see even. I cannot say it good or bad at least for Multiecuscan.
So me I cannot help you more
Good luck
Quote this message in a reply
25-03-2017, 08:24 AM,
Post: #16
RE: How to install elm 327 drivers to make it work with multiecuscan
(24-03-2017, 18:10 PM)mattydr67 Wrote:  
(24-03-2017, 14:25 PM)laguna Wrote:  
(24-03-2017, 14:07 PM)mattydr67 Wrote:  Mate for Fiat Group car that resistor must not be there. Thats why yoy cannot connect to your car ( if its CAN BUS one )
You have to know ( becuse you don't mention what car do you have ) that to connect in some controlers on k-line you need vagcom kkl but no ELM327
For othet cars you do not need to remive that resistor. ElM327 chinese clones are diffrent then real schematic on CAN BUS and this creat that issue in Fiat Group cars
Good luck

So better is to order vagcom than removing the resistor on elm327, because maybe i will need elm for other cars...?






Sent from my iPhone using Tapatalk
Mate don't you get it what I said?
The rezistor is on CAN BUS.
If you have it there then remove it. Iyou haven't it so don't. If you remove it it will let you connect on cAN BUS controler in Fiat Group cars. But this will not affect communications in all other brands CAN BUS cars.
The VagCom kkl is for kkl controlers.
Me I haven't see your kind of ELM327. You oics are such a good but take an ohmether and check if between MCP2551 6 AND 7 pins you have a resistor 1kohm or any.
As I can see in your pics ( as I can see ) I haven't seen any resistor but as I said this kind of ELM327 I haven't see even. I cannot say it good or bad at least for Multiecuscan.
So me I cannot help you more
Good luck

Ok...

I want to order a new interface which will will work with multiecuscan and fiat cars?

What do u reccommend me to get?
Quote this message in a reply
25-03-2017, 22:57 PM, (This post was last modified: 25-03-2017, 22:59 PM by mattydr67.)
Post: #17
RE: How to install elm 327 drivers to make it work with multiecuscan
Mate I cannot recomand you anything
Chinese market is a lottery.
Me for this software I am useing for a long my AVDI not an ELM327.
BUT if you have pics then share item here and we will take a look and we will advise you.
If you want a recomandation thenntry new ELM V2.1 but the real one not a clone.
Good luck
Quote this message in a reply
12-04-2017, 11:05 AM,
Post: #18
RE: How to install elm 327 drivers to make it work with multiecuscan
Update> i ordered original elm and now it works like charm
Quote this message in a reply
05-08-2017, 11:41 AM,
Post: #19
RE: How to install elm 327 drivers to make it work with multiecuscan
Hi, im trying to put work with a ELM bluetooth but with sucess, can please give the right way to do it?
Quote this message in a reply
25-12-2018, 18:48 PM, (This post was last modified: 25-12-2018, 18:59 PM by Quest_.)
Post: #20
RE: How to install elm 327 drivers to make it work with multiecuscan
can anyone advise me on what to do
i've purchased ELM327 v1.5 bluetooth and i can't get it to work with MES
i've got it paired with laptop succesfully and in device manager i can see two ports COM3 and COM4, but when i go to test these ports in MES i get errors saying ''acces to the port COM3 is denied'' and for COM4 ''the write timed out''
i've tried various port settings in device manager but nothing changes, am i doing something wrong or something else is there to do to make it work
only car i'm planning using it on is Fiat Punto mk2

https://postimg.cc/r055kTgZ

https://postimg.cc/PLwSPB2Y

https://postimg.cc/nMqZYf9z

https://postimg.cc/LgkpHjFf

https://postimg.cc/vxwyF3kb

https://postimg.cc/gwF5PZLd
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
JFiat Multiecuscan 4.0 Full REGISTERED karabulut588 36 33,695 21-02-2019, 00:10 AM
Last Post: Huber555
JFiat Fiat Multiecuscan v3.8 Full Registered obdstart 15 18,595 20-02-2019, 16:44 PM
Last Post: obdstart
JFiat Fiat Multiecuscan 3.9R1 + FIX blokers77 8 12,783 18-02-2019, 23:18 PM
Last Post: gluck
  Fiat MultiEcuScan 4.2 Twoone 16 5,388 19-01-2019, 10:11 AM
Last Post: ToMiBoY
JFiat Fiat Multiecuscan v2.2 Full Registered obdstart 22 15,059 02-07-2018, 22:45 PM
Last Post: tauros57
  Multiecuscan 3.9R1 Latest ver. mikroel 5 6,653 04-03-2018, 17:39 PM
Last Post: mattydr67
  Fiat Multiecuscan v1.4 Registred free download obdstart 2 5,388 07-12-2017, 16:53 PM
Last Post: allpro
JFiat Fiat Multiecuscan v3.1 Full Registered elmer 19 14,971 24-03-2017, 21:48 PM
Last Post: obdstart
JFiat Fiat Multiecuscan v3.0 Full Registered FREE obdstart 15 9,943 05-09-2016, 20:02 PM
Last Post: bugess
JFiat Fiat Multiecuscan v1.7 Full Registered obdstart 25 56,336 15-06-2016, 11:35 AM
Last Post: obdstart

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content