Possibly Related Threads…

***mariux0510*** · (This post was last modified: 27-03-2017, 20:31 PM by Clusters.)

Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system worried

Thank you! handshake

***betrescudan*** · 23-03-2017, 14:36 PM,

(23-03-2017, 12:11 PM)mariux0510 Wrote: Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system

Thank you!

your solution (if you want a good solution...)...and i think is better not free...
mike service yes

***mariux0510*** · 23-03-2017, 15:24 PM,

Maybe there is an easier way to disable this system for free? secret

***mariux0510*** · 23-03-2017, 22:29 PM,

How disable additive system for self? read

Maybe easier to burning this car rofl

***betrescudan*** · (This post was last modified: 24-03-2017, 05:21 AM by betrescudan.)

(23-03-2017, 22:29 PM)mariux0510 Wrote: How disable additive system for self?

Maybe easier to burning this car

write file with dpf off
disconect conector from aditiv pump
make diag and see Pcode error
now,in the file with dpf off do also dtc off
job done

***mariux0510*** · (This post was last modified: 24-03-2017, 07:58 AM by mariux0510.)

I don't have possibility to this ECU disable DPF,
but I tried to disconnect the connector from additive system,
then ECU showed fault code U0118,
but this fault code can't disable worried

***betrescudan*** · (This post was last modified: 27-03-2017, 10:43 AM by betrescudan.)

(24-03-2017, 07:57 AM)mariux0510 Wrote: I don't have possibility to this ECU disable DPF,
but I tried to disconnect the connector from additive system,
then ECU showed fault code U0118,
but this fault code can't disable

try with this

(23-03-2017, 12:11 PM)mariux0510 Wrote: Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system

Thank you!

nothing to loose...try this...

***mariux0510*** · 27-03-2017, 20:25 PM,

Solved problem, perfect solution thumbsup

***betrescudan*** · 28-03-2017, 06:39 AM,

thanks for report

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	307 2.0HDI SID803 DPF EGR OFF	Samsara69	3	56	5 hours ago Last Post: Samsara69
	ford mondeo fix cheksum	Radco555	1	22	09-05-2024, 19:51 PM Last Post: gizmo220
	ford tva problem eprom edc17c70	guciek	0	19	08-05-2024, 15:10 PM Last Post: guciek
	ford fiesta dtc off please fomoco_bosch_mg1cs016_tc275tp	dleer2007	0	45	04-05-2024, 17:52 PM Last Post: dleer2007
	ford fiesta 1.4tdci sid804 limp mode	cmoosecan	2	705	04-05-2024, 14:06 PM Last Post: michelespl
	Ford Kuga - 2011 - 2.0 TDCI	mini1.3	2	60	02-05-2024, 14:41 PM Last Post: mini1.3
	ford custom sid208 DPFOFF	spoool	2	141	01-05-2024, 10:52 AM Last Post: spoool
	Ford S-max DPF off please	kami2k	3	108	30-04-2024, 11:26 AM Last Post: pistolo30
	Ford Question	Stopro92	1	113	29-04-2024, 20:32 PM Last Post: sanndo
	2006 Ford mustang dtc and lambda off	hero3838	0	37	29-04-2024, 20:07 PM Last Post: hero3838

Contact Us