[flashdash]

Does anyone have Pin out for the above cable which is used to read Volvo Siemens and Bosch ecu through obd port

Sent from my SM-G935F using Tapatalk

[pocinas]

I looking this pinout as well.

Anyone can help?

[Willinickersen]

Which ECU? There are hundreds of different

[pocinas]

Example V50 1.6d from 2008 (EDC16C34), kess shows required 144300k264 cable, and all Volvo models from Protocol 488,489, EDC16C34, SID206, SID803, SID803 A, SID807, required this cable.

I read this ecu on the bench anyway, i readed on another forum only banch this model car with this ecu, but there is still couple another Cars wchich required this cable,
I would like build cable self, cost max £10 (genuine call £100 and more).

I got some schemat for volvo kable 144300k264 but i RING multimeter with CAN standard cable and pinout is the same what CAN cable.

I got carprog and in adapters set there is VOLVO/FORD adapter and i ring all pinout and is CAN -L and CAN-H changed in diffrent place, so not sure in what believe.

Have someone GENUINE VOLVO cable? and can RING with multimeter wchich pins OBD2 is connected which on DB25 pinout.

Thanks

[Willinickersen]

Read this https://cartechnology.co.uk/showthread.php?tid=35845

[pocinas]

Little helpfully, but still have some question there.

[harris]

does any one connect OBD2 with trw ecu volvo
with kess V2

i still not bcz of cable and protocol
plz help