Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Pinout needed for kess cable 144300K264
23-03-2017, 21:36 PM,
Post: #1
|
|||
|
|||
Pinout needed for kess cable 144300K264
Does anyone have Pin out for the above cable which is used to read Volvo Siemens and Bosch ecu through obd port
Sent from my SM-G935F using Tapatalk |
|||
03-06-2019, 20:03 PM,
Post: #2
|
|||
|
|||
RE: Pinout needed for kess cable 144300K264
I looking this pinout as well.
Anyone can help? My post helps you? Please Hit REPUTATION and THANKS Buttons
|
|||
04-06-2019, 08:42 AM,
Post: #3
|
|||
|
|||
RE: Pinout needed for kess cable 144300K264
Which ECU? There are hundreds of different
Back to basic....account reset to 2018
Learning by reading, learning by doing, learning by experience |
|||
12-06-2019, 15:39 PM,
(This post was last modified: 12-06-2019, 19:49 PM by pocinas.)
Post: #4
|
|||
|
|||
RE: Pinout needed for kess cable 144300K264
Example V50 1.6d from 2008 (EDC16C34), kess shows required 144300k264 cable, and all Volvo models from Protocol 488,489, EDC16C34, SID206, SID803, SID803 A, SID807, required this cable.
I read this ecu on the bench anyway, i readed on another forum only banch this model car with this ecu, but there is still couple another Cars wchich required this cable, I would like build cable self, cost max £10 (genuine call £100 and more). I got some schemat for volvo kable 144300k264 but i RING multimeter with CAN standard cable and pinout is the same what CAN cable. I got carprog and in adapters set there is VOLVO/FORD adapter and i ring all pinout and is CAN -L and CAN-H changed in diffrent place, so not sure in what believe. Have someone GENUINE VOLVO cable? and can RING with multimeter wchich pins OBD2 is connected which on DB25 pinout. Thanks My post helps you? Please Hit REPUTATION and THANKS Buttons
|
|||
12-06-2019, 19:37 PM,
Post: #5
|
|||
|
|||
RE: Pinout needed for kess cable 144300K264
Back to basic....account reset to 2018
Learning by reading, learning by doing, learning by experience |
|||
12-06-2019, 20:45 PM,
(This post was last modified: 12-06-2019, 20:54 PM by pocinas.)
Post: #6
|
|||
|
|||
RE: Pinout needed for kess cable 144300K264
Little helpfully, but still have some question there.
My post helps you? Please Hit REPUTATION and THANKS Buttons
|
|||
18-08-2019, 20:41 PM,
Post: #7
|
|||
|
|||
RE: Pinout needed for kess cable 144300K264
does any one connect OBD2 with trw ecu volvo
with kess V2 i still not bcz of cable and protocol plz help |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content