[giriprakash1978]

Hi VOLAVKA......please IMMO off for KIA Shortage 2003 ECU BOSCH M261206566.....original file from AM29F010(B58399)......and please tell me....the place where we put Zamper there is 2 smd resistor...but in my ECU only one resistor have...tell me which value resistor we must put

[volavka]

Hi VOLAVKA......please IMMO off for KIA Shortage 2003 ECU BOSCH M261206566.....original file from AM29F010(B58399)......and please tell me....the place where we put Zamper there is 2 smd resistor...but in my ECU only one resistor have...tell me which value resistor we must put

Try this !

Remove the EEPROM 24C02,
and merge the two points as in the picture at Post: #7

[giriprakash1978]

Hi VOlavka....that file is not work to bypass IMMO......i found same year Vehical and take out ECU and IMMO,that one is same as mine and copy IN IMMO 93lc46 and ECU 24LC02 and 29F010......after finishing i put that in vehicle that one work fine both that which i copy and original......and i copy transponder too, that one is also ok work fine .......and that programming ECU and IMMO put on old vehical that one did not started....but IMMO is ok....i check oil pressur on engine that one is also ok......now i find the injecter voltage + is ok but - is not........so please tell me that ECU and IMMO i put on ok vehical work fine.....and i put same on old vehical injector - voltage is disable why

[chong5195]

Any idea immo off mate