[jaki]

To the previous post:
I installed unit to my car and everything works fine, even navigation!
Still iB show double red, so that didn't go well. And in FSTools it show wrong VIn number for that FSC (original from unit)
Can I just try to install this FSC again or is there a risk that I ruin everything?
Otherwise I don't mind, but I like to update maps, and I wnat to be sure it goes smooth.

[NeRkO20]

what is iB? or do you mean 1b?
You should generate and proceed like with the other ones...
But you cannot overwirte it now, you have to viriginze again OR generate new 1b with newer Time stamp then the one whih is now in CIC

[jaki]

I finally got all FSC in place and green. but:
I cannot do map update. If i use the 1B what is in templates (modified naturally with my vin etc) it gives me source to map generators but none of them are valid.
if i pull 1b from CIC all except esysx generator refuses those (too long file or corrupted).
What I'm doing wrong?

EDIT: all solved now. I generated new FSC's with different (newer) date, after that, everything works as expected.
Thank's to intel this superior solution

[papachivas]

Hello everyone I have problems importing fscs and certificate with Fstool2 to CIC can anyone help me I have no experience with Fstool2 tool w can someone send me instructions on how to unify and add the fscs and certificate.

[NAVJunk]

You have to update the CIC to the latest software-version, than you have to input the virginizer-patch.

When the CIC High is virginized, you can start creating your certificates with your vin and input them into your CIC Headunit.

[papachivas]

You have to update the CIC to the latest software-version, than you have to input the virginizer-patch.

When the CIC High is virginized, you can start creating your certificates with your vin and input them into your CIC Headunit.

it already happened by mistake 
Went to copy 1b to refresh navigation 
And I copied it via pendrive 
But the pendrive had a Bin file generated by hutool and virginized After that navigation and voice command turned gray
All fscs in red 
Now I need to import the fscs 
But I don't know how to do this I got the fsc package here in the ask for fsc session 
I need help to be able to import the fscs 
I tried with ISTA-P but when I insert the pen drive it doesn't find it

[NeRkO20]

what is a pen drive? A usb mass storge "stick"?
did you solve your problem?

[papachivas]

what is a pen drive? A usb mass storge "stick"?
did you solve your problem?

Yes a "stick<" sorry for the English.
Still not solved I tried to import the fscs but it always rejected
I bought an emulator to try to solve
 I think you have to program the CIC.
But with ISTA-P it doesn't accept asks to activate ib,19,17 first 
I think you have to try programming with winkfp.
But I don't want to run the risk of giving an error at the time of programming.
Do you have any solution for this?

[NAVJunk]

Find a proficient coder in your area and let them do it - that is the best solution not to destroy anything by yourself because you didn't do it before and not having the right hardware to do it.

[NeRkO20]

You have to Flash CIC with Winkpf, then put in the patch via USB from this topic here (link on first side).
Afterward generate the needed FSCs and upload them.

Do you have a Power supply? You shouldn't flash the CIC without.
Do you have ICOM and ICOM B (Optical/Most Bus)?

Is your fstool2 working?

If yes, I can help you maybe via TeamViewer/Anydesk