[epsodus]

Aknight720, why do you use strange documents?
Aknight720 has decrypted nothing, he has converted the FSC data only in HEX.
Where is the secret?
I believe it understands the use of FSC's not and certainly not from the RSA procedure with MD5.

---

Ok, let's start. You have an original FSC code from BMW.
It consists of three files, for example:
Axxxxxx_001B0001.der
Axxxxxx_001B0001.fsc
Axxxxxx_001B0001.xml

Use your Openssl

Openssl x509 -inform DER -in Axxxxxx_001B0001.der -outform PEM -out Axxxxxx_001B0001.pem
Openssl x509 -in Axxxxxx_001B0001.pem -noout -text -fingerprint -sha1 -modulus> Axxxxxx_001B0001.txt

Now consider times further

[intel123]

RELEASED, DONE IN 10 SECONDS READ FIST POST


and just to announce, i will do the same for NBT/EVO in next few days one by one as i get devices at the bench.

[Gatsby79]

Perfect working done. Already tested on bench and in car.
epic work.

[sebastianfernandes]

RELEASED, DONE IN 10 SECONDS READ FIST POST


and just to announce, i will do the same for NBT/EVO in next few days one by one as i get devices at the bench.

Intel123
I shall try it out tomorrow. How do i go about removing the patch if already applied before from another source? Just Flash the CIC again would be enough? or should i virginize it? I've got backup of root cert, sig cert, swt controller and also the cic first and second bin file. Will it be ok if i copy it back and overwrite via FTP?

[intel123]

Intel123
I shall try it out tomorrow. How do i go about removing the patch if already applied before from another source? Just Flash the CIC again would be enough? or should i virginize it? I've got backup of root cert, sig cert, swt controller and also the cic first and second bin file. Will it be ok if i copy it back and overwrite via FTP?

You should flash to factory spec, latest SW and then patch, otherwise it will just not work, you will insert USB and it will not patch or reboot as pattern match will fail. So no go.

[ChampioNbg]

RELEASED, DONE IN 10 SECONDS READ FIST POST


and just to announce, i will do the same for NBT/EVO in next few days one by one as i get devices at the bench.

Perfect work, brate!

What are the risks that you see in using the approach and espacially using it over CIC which has been never updated and has old version in it?

When CIC does not reboot over 20 sec, is it bricked or the your code sees that and does not do anything and therefore it does not reboot?
If the CIC is due to the software incompatible bricked, how could it be again resettet?

Small DIY with screenshot will be perfect as well.

Greets

[sebastianfernandes]

Intel123
I shall try it out tomorrow. How do i go about removing the patch if already applied before from another source? Just Flash the CIC again would be enough? or should i virginize it? I've got backup of root cert, sig cert, swt controller and also the cic first and second bin file. Will it be ok if i copy it back and overwrite via FTP?

You should flash to factory spec, latest SW and then patch, otherwise it will just not work, you will insert USB and it will not patch or reboot as pattern match will fail. So no go.

Great i shall try it out tomorrow and post the results here..
many thanks for this awesome job!!!!!!

[intel123]

Sometimes cheap usbs takes longer than 20 secs you should check if it blinks but if definetly no restart after even half minute or so, then something didnt match and patch was not performed. No harm done, worst case scenario its virginized. It wont make patching if not 100% matched with latest sw oem state

hvala

[fumantwo]

Sorry for maybe this silly question, If i patched my cic with your previous usb script activator (like I did), do i have to flash to factory again?

If is no to my question, maybe as you state at the end of the first message, that is the reason why my 1B can not be accepted with the car donor VIN?

Thank´s for all your hard work

[inotherwords]

and also the cic first and second bin file.

Oh, how did you make these bin files?

intel123, svaka čast!