[larrybml]

I change it by coding it and flshing it with new VIN, I think is changed. I give up ladt evening because it won't apply patch after flashing, and activated it with script. Another time I will try again.
Anyway many thanks to Intel123 for his work and others that wanted to help.

[Mr Bimmer]

I'm having trouble getting FStools to work but I should be able to load the codes with Dr Gini.

My problem is with getting the first signing off process done.

Is it possible to sign the codes for an E series Cic using E-sys? I've gone through the process as per the instructions and cant verify the signature.

I load the 1B from 03_FSC_Templates,

Then I edit the vin number and nothing else.

Then I point the Key field to 00_Privatekeys\fscs.der

I Click sign and it's ok
Validate data and it's ok
Validate signature and I get a Failed to write signature C163 warning

Instructions say i don't need privatedate\root.der or sig.der. Can these be deleted for tidyness?
Where do I use the 02_cert\Root.der?

Where am I going wrong?

Thanks

[danyro]

Hi

with many thanks to sebastianfernandes, i managed to upload 17,19 and 1B fscs.

as this forum is about sharing, i will post sebastian's instructions which he sent to me.
moreover, i have made an Archive with an working FSTool kit - carserver+fstool+ediabas+jre.

with this archive, all above fscs have been uploaded into CIC.

last but not least -@intel123 - many thanks from my side too for your contribution and the willingness to share.

==============================================
Sebastianfernandes's instructions:
When you have downloaded dr gini from forum you will have a zip called folder ediabas, and ecu and api32.dll. Extract the contents and copy paste in c:\ediabas and then copy paste C\ediabas\ecu with the contents of Ecu.zip. Do the same for api32.dll file in c:\ediabas\bin. Now install gini. You will see that gini has made a folder called server in C:\ediabas\bin. Copy it's contents and paste in c:\ecapps\carserver. Now it should work without returning error 7009.
===============================================

cheers!

[Diablo901]

Hello work on cic mid ?

[maho]

Hello work on cic mid ?

No it's all written in 1st post.......

Gesendet von meinem SM-G935F mit Tapatalk

[Diablo901]

Now I just read professional excuse me

[larrybml]

I managed to make it work, but not for long, and I don't understand why?
I think that deleting old fsc's first is the first thing that must be done. After I deleted old fsc's everything went quickly and right and worked perfectly. All FSC's were accepted, even after 2 restarts, BUT after car went to sleep, navigation is dead ( gray, and can not be selected ). Why? I didn't had my tools with me to see what is the problem, but I gues that FSC's are rejected now. Anyone else had this problem?

[btelega]

Why this dont work with CIC MID ???

[SweetBMW]

Tried this on two cars now, on one it worked without problems. On the second one (both F10) the FSC gets loaded with esys correctly, and status is accepted for cert and fsc. But navigation is greyed out. Put in stick with new map (to load the 28 fsc) and it went to 100%. But after the map was completed the Navigation is still greyed out.

Any suggestions? Getting the car back today but im not quite sure where to start. I guess i will check the fscs to see status, but if they are accepted then what?

[larrybml]

Same situation here. Please share if you find a solution. My FSC's are all accepted, map update works, but navigation gray.