Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FEM on bench - KL15_ein problem
04-04-2017, 17:02 PM,
Post: #1
FEM on bench - KL15_ein problem
Hi,

I'm trying to make setup using FEM on bench but always have problem with turning on KL15. I can turn on KL30, KLR but when I try to use tool32 to turn on kl15 I always get this:

Code:
apiJob("G_CAS","steuern_klemmen","kl15_ein","")

Satz : 0
  OBJECT                          = fem_20
  SAETZE                          = 1
  JOBNAME                         = steuern_klemmen
  VARIANTE                        = FEM_20
  JOBSTATUS                       =
  UBATTCURRENT                    = -1
  UBATTHISTORY                    = -1
  IGNITIONCURRENT                 = -1
  IGNITIONHISTORY                 = -1
Satz : 1
  JOB_STATUS                      = ERROR_ECU_CONDITIONS_NOT_CORRECT


Any idea why this happends ?
I measured KL15 wake up output signals from FEM and KL15 is off.
Quote this message in a reply
05-04-2017, 13:06 PM,
Post: #2
RE: FEM on bench - KL15_ein problem
I dont think the FEM will activate terminal 15 without the presence of a valid key.
Quote this message in a reply
05-04-2017, 13:43 PM,
Post: #3
RE: FEM on bench - KL15_ein problem
For sure will. Many people confirm that. When you use ISTA P or D it can also turn on kl15 even when you dont have key in car.
KL15 on don't mean that you can start up engine...
Quote this message in a reply
06-04-2017, 12:37 PM,
Post: #4
RE: FEM on bench - KL15_ein problem
I guess once the session runs and key is removed from the car ISTA/P it will finish it, but will the session start without a valid key in the car?
Quote this message in a reply
06-04-2017, 12:45 PM,
Post: #5
RE: FEM on bench - KL15_ein problem
For sure you can do it with tool32. It is only KL15, that don't mean that you can start car. It is only relay in fuse box....
Quote this message in a reply
[+] 2 users say Thank You to osd for this post
18-08-2017, 16:50 PM,
Post: #6
RE: FEM on bench - KL15_ein problem
Whats the function in tool32 for KL 15 wake up signal?

All my knowledge is free for exchange with valuable information
Sharing->Development
  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
Quote this message in a reply
18-08-2017, 18:26 PM,
Post: #7
RE: FEM on bench - KL15_ein problem
Inpa f Serie FEM Modul klemmen einsteüerung
Quote this message in a reply
05-04-2018, 20:23 PM,
Post: #8
RE: FEM on bench - KL15_ein problem
I have the same problem. Did you fix this ?
Quote this message in a reply
08-06-2019, 06:42 AM,
Post: #9
RE: FEM on bench - KL15_ein problem
Hello, what is the value in Tool32 to turn on Fem station to the KL15?
Quote this message in a reply
08-06-2019, 16:44 PM,
Post: #10
RE: FEM on bench - KL15_ein problem
apiJob("FEM_20","steuern_klemmen","KL15_EIN","")

Satz : 0
OBJECT = fem_20
SAETZE = 1
JOBNAME = steuern_klemmen
VARIANTE = FEM_20
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
STAT_CAS_KLEMMEN_STATUS = 10 0A .
STAT_CAS_KLEMMEN_STATUS_TEXT = KL15
JOB_STATUS = OKAY
_REQUEST = 7 Bytes
0000 : 31 01 10 01 0A 0A 43 1.....C
_RESPONSE = 5 Bytes
0000 : 71 01 10 01 0A q....

Email: [email protected]  Skype: [email protected]
HU Engineering Tool
MGU Engineering Tool - now with field update mode via Feature Installer.
Coding 2.0
Reputation: +2 - RReader [+1] , Tech206 [+1]
Quote this message in a reply
[+] 4 users say Thank You to pshoey for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 80 Yesterday, 18:47 PM
Last Post: Unspec
XZBMW Tool for bench read 8hp Garryq 9 1,572 26-03-2024, 09:32 AM
Last Post: skywoker
  ISTA launcher problem Red_bean_bun 1 171 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 205 25-03-2024, 21:55 PM
Last Post: BmwMerc
  BMW e39 530d 2001 problem after MAF change boweld11 3 106 24-03-2024, 22:44 PM
Last Post: SkeYT
XZBMW Entrynav2 Maps Problem Chillmeister 3 288 24-03-2024, 17:18 PM
Last Post: Chillmeister
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,910 24-03-2024, 11:29 AM
Last Post: Twointje
  Battery lead positive underfloor problem da.2022 10 210 24-03-2024, 09:38 AM
Last Post: pupu144
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 344 22-03-2024, 12:55 PM
Last Post: Node

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content