Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
(SOLVED!!) Unable to program used EPS
12-04-2017, 18:40 PM,
Post: #21
|
|||
|
|||
RE: Unable to program used EPS
(12-04-2017, 18:37 PM)fatfash Wrote:you will need to start working with either E-Sys or Ncsexpert/winkpf(12-04-2017, 18:24 PM)CATAHA Wrote: I'm not sure if i'm going to repeat this but this is what I would do Ista P is not your tool for this job If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
12-04-2017, 18:59 PM,
(This post was last modified: 12-04-2017, 19:04 PM by fatfash.)
Post: #22
|
|||
|
|||
RE: Unable to program used EPS
[/quote]
you will need to start working with either E-Sys or Ncsexpert/winkpf Ista P is not your tool for this job [/quote] Okay. can you explain this line "Check that there is correct VO coding around the board in all reflecting module's" as i am not sure i understand it. Do you mean changing the servotronic (216) to VSS (2VL)? |
|||
12-04-2017, 19:37 PM,
(This post was last modified: 12-04-2017, 19:38 PM by CATAHA.)
Post: #23
|
|||
|
|||
RE: Unable to program used EPS
(12-04-2017, 18:59 PM)fatfash Wrote: you will need to start working with either E-Sys or Ncsexpert/winkpfYes changing VO(option) and if you have Navi then making sure it's been coded with correct FCS code |