[RAMON31]

HELLO I NEED IMMO OFF OF THIS UNIT
MEMORY 24C02

IMMOKILLER DONT WORK

[gizmo220]

IMMO OFF 0281001969 RENAULT MEGANE DTI

[RAMON31]

Starts the first time and perfect everything but when you stop it does not start again.
Do you need an emulator?

[loki954]

You have to use simulator or have to put new 24c02 with the file that start only one and make it WP (7pin over 8pin)

[gizmo220]

MMO OFF 0281001969 RENAULT MEGANE DTI

[darek_naprawa]

Here you have a solution.
http://cartechnology.co.uk/showthread.php?tid=23588
Cut the wires .

[grmsek.damjan]

Hello
Now here are a few off files..From which user the file is 100% working without engine light on iddle and glowplugs all the time on???(this is common problem with immo off in these engines)
Thankyou

[RAMON31]

Gizmo20 I sent the one that worked well, however I had to put an emulator and cut pin 59 (the cable).
Without eeprom 24c02 works but does not accelerate more than 3000 rpm

[grmsek.damjan]

So, if you are fited an immo emulator on your ecu I assume that @gizmo220 file is not off file, but is virgin file and you solder the same 24c02 eeprom back,but virgin? (instead 24c04 wp)
Correct?

[RAMON31]

If, like the gizmo file, because following the emulator instructions, having changed the uch, did not start, but nevertheless, when putting the gizmo file, the emulator, and cut pin 59, perfect everything.

Then try removing a cable from the emulator, and without it it will not start ..

The most sensible thing is to copy the information of the mcu, but I do not have the means to do it so improvise that solution.

The only drawback is that the INMO LED is flashing. Solution: desoldering LED.
Everything seems more complicated, but it has not been.