Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
09-02-2018, 19:44 PM,
Post: #11
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
Hi guys,

My name is Vasilis from Greece 34 yo..
I downloaded all stuff and successfully installed diagbox until 7.76 (can t install 7.82,i put the correct pass but nothing happens)

My laptop is on windows 10 64bit,but the installation is on (through vm virtualbox) xp 32 bit..

so,now i am at the point that asks to connect a vci card

After installing,what are the next steps (must i input any other settings/codes anywhere?, i will use it for Peugeot car)?

I have a bluetooth elm327 device but i am not sure if this is the thing to make the job done..it is something like this more or less

https://www.aliexpress.com/item/2016-Cod...21803.html

Is this good for me?

https://www.aliexpress.com/item/2015-Sup...autifyAB=0

Thanks in advance for suggestions about next steps
Quote this message in a reply
13-02-2018, 18:18 PM,
Post: #12
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
You absolutely need the second one, nothing to do with ELM. Full chip is the way to go.
Quote this message in a reply
[+] 2 users say Thank You to vaho for this post
14-02-2018, 07:02 AM,
Post: #13
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
What version of Diagbox support Romanian language ?
Quote this message in a reply
19-02-2018, 06:05 AM,
Post: #14
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
Hello, greetings, I wanted to inform me a little about this diagnosis system for Peugeot.Citroen, because in my house, my father has a Peugeot 308 EHdi, of the year 2015, I remember. Which is the most recent and valid device version that I have to search online to buy? ... thanks
Quote this message in a reply
05-05-2018, 18:57 PM,
Post: #15
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
(09-05-2017, 21:31 PM)Simple Wrote:  Attached is a Magnet link which includes DiagBox 7.01/02 + Updates -> 7.82 + B/C Firmware + Drivers + Tools. It includes:

1- DiagBox 7.01/02
2- DiagBox Updates up to 7.82
3- DiagBox Windows Drivers
4- VCI Firmware Flashing files (APPLI.COM 4.3.2 + VCI_UPDATER.COM Revision /C)
5- Flashing Tools

Passwords needed are within the included documents.

DiagBox Update 7.83:
http://cartechnology.co.uk/attachment.php?aid=41997

Simple..

got to v7.74 it asks for activation
Quote this message in a reply
13-08-2018, 19:45 PM,
Post: #16
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
Hi.
Running DiagBox v7.40 with FW 4.3.5 (appli.com)
Diagbox recognice the interface, but it always replies with "No dialogue"
My interface is not full chip. But I should get response some how anyway, shouldnt I?
Quote this message in a reply
27-08-2018, 17:41 PM,
Post: #17
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
Hi. New to this site so sorry if this isn't the right place to post this.
I have diagbox 7.57 with the PSA Interface at V4.3.2
I have problem with communication to ECU. Always getting the no dialogue fault.
Car is not in economy mode. Firewall isn't blocking anything.
I have tried numerous installs of diagbox trying to fix this problem and still to no avail.
Have tried the diagbox on two different cars. PP2000 works on the older car though.
Running on win xp sp3 32bit. .NET 3.5 installed etc.
Is this a software or a hardware issue?
Quote this message in a reply
28-08-2018, 09:09 AM, (This post was last modified: 28-08-2018, 09:09 AM by zmann.)
Post: #18
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
@patrikspain if your DB sw not updating the FW automatically when start (and this happening to those new version of v7.xx, v8 but don't remember exactly) you may check from the below list and up/down grade manually by PSA interface checker and try again

v4.2.2 : Lexia/PPS last version (v348.01/v25.01)
v4.2.4 : DB v5.02 to v5.29
v4.2.8 : DB v5.30 to v5.??
v4.2.9 : DB v5.43 to v6.10
v4.3.0 : DB v6.11 to v7.39
v4.3.2 : DB v7.40 to ~v7.61 ?
v4.3.3 : DB ~v7.61 to ~v7.xx ? (quite short life)
v4.3.4 : DB ~v7.66 to ~v8.02 ?
v4.3.5 : since DiagBox v8.45
not 100% precisely just about on some version
Usually with wrong FW version would cause "no dialouge'

@dialouge you didn't mention the car and the ECU. Old cars with old ECU's and they are all with K-line protocols to diag tool. Newer cars since 2007 are plenty with CAN protocol ECU's but still with some K-line though. Your tool might suffer some communication channel/protocol which allocated on different OBD pins
Quote this message in a reply
[+] 2 users say Thank You to zmann for this post
30-10-2018, 13:51 PM,
Post: #19
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
(05-05-2018, 18:57 PM)teerak2uk Wrote:  
(09-05-2017, 21:31 PM)Simple Wrote:  Attached is a Magnet link which includes DiagBox 7.01/02 + Updates -> 7.82 + B/C Firmware + Drivers + Tools. It includes:

1- DiagBox 7.01/02
2- DiagBox Updates up to 7.82
3- DiagBox Windows Drivers
4- VCI Firmware Flashing files (APPLI.COM 4.3.2 + VCI_UPDATER.COM Revision /C)
5- Flashing Tools

Passwords needed are within the included documents.

DiagBox Update 7.83:
http://cartechnology.co.uk/attachment.php?aid=41997

Simple..

got to v7.74 it asks for activation


I have the same problem. At 7.74 it asks for activation. Any ideeas why ?
Quote this message in a reply
[+] 1 user says Thank You to danny0n for this post
28-11-2018, 20:08 PM,
Post: #20
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)
Same problem at 7.74, any solutions? thx
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  PSA Diagbox VCI Interfaces alexturbo 18 6,454 27-12-2023, 21:45 PM
Last Post: apol
PPeugeot DIAGBOX 2021 9.85 FULL INSTALATION akli 6 2,535 26-12-2023, 20:21 PM
Last Post: Le-Mans
PCitroen DIAGBOX online walczaklu 10 8,540 03-12-2023, 12:57 PM
Last Post: mattydr67
PPeugeot Diagbox 9.129 activation request dadoa4 4 2,348 09-11-2023, 09:59 AM
Last Post: bovhec
  diagbox 9.150 stasi 5 2,040 16-09-2023, 19:41 PM
Last Post: stasi
  DiagBox Language Change Simple 16 17,331 14-09-2023, 10:01 AM
Last Post: żarówka
  DIAGBOX help needed installing mars2moon 4 996 23-07-2023, 18:45 PM
Last Post: J415UNNY
PPeugeot Diagbox 9.91 VmWare gabi2008 6 4,177 23-07-2023, 18:42 PM
Last Post: J415UNNY
  diagbox latest ? Chad69 1 822 09-06-2023, 22:28 PM
Last Post: simo2k
  Diagbox BSI Access to this function not enabled ixoal 3 811 02-05-2023, 10:05 AM
Last Post: adamos_22

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content