[adel.nooh]

Hello
I need immo off for vw golf V GTI 2008
With engine ecu bosch med9.1
EEPROM 95160
Do i need only the EEPROM dump or also the flash ?
Can i do this with xprog or fvdi.
I try by fvdi (obd) but it ask for 10 minutes waiting then nothing.
I take off the ecu .... can i connect fvdi to the ecu directly or it must be via obd2 port of the car only?

Please give me pictures of possible.

[sabian]

Please post your eeprom and i can help you,You need to open ecu and read eeprom with xprog.

---

Be carrefully when open ecu you can damage, look on internet how to open ecu.

[adel.nooh]

Please post your eeprom and i can help you,You need to open ecu and read eeprom with xprog.

---

Be carrefully when open ecu you can damage, look on internet how to open ecu.

This the dump of EEPROM 95160
Can u please give me immo off?

[volavka]

Give a try

[adel.nooh]

Xprog cant erase 95160 EEPROM
if i make write directly the blank check fail and tell me if i wanna continue writing immo off file without erasing the EEPROM
Is it safe to continue writing without erasing ?

I have doubts that this EEPROM has some kind of protection ( may be any 1 bit can become 0 but 0 bit cant change to 1 )
Wait your reply to proceed ?

---

The EEPROM from ST and it is written on it "95160 3"

---

YOU SEND ME THE SAME FILE WITH DIFFERENT NAME ONLY

[volavka]

Sorry try this

[adel.nooh]

How about write dump without erasing ?

[volavka]

Erasing not needed

[adel.nooh]

I tried and it didnt work.

[bram380]

Try again