[ELECTRONICO]

Hello for all membre
I have a probleme for me FVDI Full with 18 Software‎ 2014 it was working well
But now it no longer works with BUS CAN. connection failure with all module CAN BUS BUT with k-line is ok. Is it a hardware or software defect ?
HELP PLS.

[sharawi]

It is ahardware

[darek_naprawa]

Replace ADG1406BRUZ

[ELECTRONICO]

Replace ADG1406BRUZ

For this chip is for k-line and can bus ?

[darek_naprawa]

Yes this chip is for k-line and can bus.
There are still can bus ADG1404YRUZ.
How does it work on any can of this replace ADG1406BRUZ this is the main switch.

[ELECTRONICO]

Yes this chip is for k-line and can bus.
There are still can bus ADG1404YRUZ.
How does it work on any can of this replace ADG1406BRUZ this is the main switch.

Thank you for help.
I will replace it

[musta2007]

have replace ADG1404YRUZ and ADG1406YRUZ ,but not issu,my fvdi 2015 stil not work on can hs

[hotcoding]

have replace ADG1404YRUZ and ADG1406YRUZ ,but not issu,my fvdi 2015 stil not work on can hs

did you found solution, i have the same problem, but im not changed these ic?

[ermuraky1]

have you solved the can bus problem?
also for me k line works, while can not want

[the_nexux]

My fvdi interface has CAN-bus problem I fixed it. The solution is replace 34063 IC on backside of panel, this ic make 5.5v for some communication IC (canbus ic)...