Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Anyone can help me for mount E-series bench?
18-05-2017, 18:38 PM,
Post: #1
XZBMW  Anyone can help me for mount E-series bench?
I want to make Eseries bench, i have JBE3, CAS3+ and emulator.
need more?
keys and start buttom is needed?

Thanks

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
[+] 3 users say Thank You to ruben_17non for this post
18-05-2017, 19:13 PM,
Post: #2
Anyone can help me for mount E-series bench?
(18-05-2017, 18:38 PM)ruben_17non Wrote:  I want to make Eseries bench, i have JBE3, CAS3+ and emulator.
need more?
keys and start buttom is needed?

Thanks


Yes you need key and elv that fits the cas module. Otherwise you will not get ignition 12v



Sent from my iPhone using Tapatalk

Don't forget to press [Image: thanks.gif] and [Image: postbit_reputation.gif], if my post helped you.
Reputation: +1 - ruben_17non [+1]
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to mjuhl2003 for this post
18-05-2017, 19:31 PM, (This post was last modified: 18-05-2017, 19:51 PM by ruben_17non.)
Post: #3
RE: Anyone can help me for mount E-series bench?
(18-05-2017, 19:13 PM)mjuhl2003 Wrote:  
(18-05-2017, 18:38 PM)ruben_17non Wrote:  I want to make Eseries bench, i have JBE3, CAS3+ and emulator.
need more?
keys and start buttom is needed?

Thanks


Yes you need key and elv that fits the cas module. Otherwise you will not get ignition 12v



Sent from my iPhone using Tapatalk

Great, thanks you
i not know elv is needed, but maybe for coding not is need ignition, right?
but i look elv emulator in ebay, a bit expensive, but i will buy.

wiring only is need power supply for CAS and JBE, Canbus wires, ELV + OBD?
will not dificult make bench

connector for CAS:
1x 61136913650 41pol
1x 61136906054
1x 61136913652

connector for JBE
pair of standard 54 pol, like mulf connector

PTcan not is need, right?

i look this:

CAS
[Image: 14xnjti.png]

JBE
[Image: nmn3o2.png]

ELV
[Image: qy6a2c.png]

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
18-05-2017, 20:56 PM, (This post was last modified: 18-05-2017, 21:13 PM by bryosb.)
Post: #4
Anyone can help me for mount E-series bench?
Something like this, I get term 15 on most w/o EVL but I guess that depends on what ur doing. I'm doing mostly DMEs and CAS

[Image: 68fba2e9bb314365742c67e9104823d6.jpg]


Sent from my iPhone using Tapatalk

Here's another

[Image: 4eefbed5d347e150f9c9cec633085828.jpg]


PM sent

Sent from my iPhone using Tapatalk

Credit goes to Bawareca, that's who taught me and now I can show you smile
Reputation: +1 - ruben_17non [+1]
Quote this message in a reply
[+] 2 users say Thank You to bryosb for this post
19-05-2017, 05:08 AM, (This post was last modified: 19-05-2017, 05:08 AM by Levanime.)
Post: #5
RE: Anyone can help me for mount E-series bench?
(18-05-2017, 20:56 PM)bryosb Wrote:  Something like this, I get term 15 on most w/o EVL but I guess that depends on what ur doing. I'm doing mostly DMEs and CAS

[Image: 68fba2e9bb314365742c67e9104823d6.jpg]


Sent from my iPhone using Tapatalk

Here's another

[Image: 4eefbed5d347e150f9c9cec633085828.jpg]


PM sent

Sent from my iPhone using Tapatalk

Credit goes to Bawareca, that's who taught me and now I can show you smile

exactly same for me smile
and also autohex

plus i have frm and cluster

but mine is bit clear biggrin

bikerdriveenjoy
Quote this message in a reply
19-05-2017, 06:57 AM,
Post: #6
RE: Anyone can help me for mount E-series bench?
If you have CAS3 then flash it with e90 software without elv...
Reputation: +1 - ruben_17non [+1]
Quote this message in a reply
[+] 2 users say Thank You to TomoR for this post
19-05-2017, 09:03 AM, (This post was last modified: 25-05-2017, 12:10 PM by ValeS.)
Post: #7
RE: Anyone can help me for mount E-series bench?
Hire is cas3+ ( 0L15Y) flash without elv.
Reputation: +3 - ruben_17non [+1] , gvitkis [+1] , bryosb [+1]
Quote this message in a reply
[+] 8 users say Thank You to ValeS for this post
19-05-2017, 12:10 PM, (This post was last modified: 19-05-2017, 16:52 PM by Clusters.)
Post: #8
RE: Anyone can help me for mount E-series bench?
Damn, just i check CAS 3+ have 0M23S no way for read with R270, maybe also need buy XprogM...

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
19-05-2017, 12:41 PM,
Post: #9
RE: Anyone can help me for mount E-series bench?
Look on cantiecar adapter. You can plug any exx CAN ecu directly to adapter.

[Image: 4b70f53a3e7c.gif]
Quote this message in a reply
[+] 2 users say Thank You to xDrive for this post
19-05-2017, 16:58 PM,
Post: #10
RE: Anyone can help me for mount E-series bench?
(19-05-2017, 05:08 AM)Levanime Wrote:  
(18-05-2017, 20:56 PM)bryosb Wrote:  Something like this, I get term 15 on most w/o EVL but I guess that depends on what ur doing. I'm doing mostly DMEs and CAS

[Image: 68fba2e9bb314365742c67e9104823d6.jpg]


Sent from my iPhone using Tapatalk

Here's another

[Image: 4eefbed5d347e150f9c9cec633085828.jpg]


PM sent

Sent from my iPhone using Tapatalk

Credit goes to Bawareca, that's who taught me and now I can show you smile

exactly same for me smile
and also autohex

plus i have frm and cluster

but mine is bit clear biggrin

Ah but soon, thanks to you my friend, my bench will also be cleaner rock
Quote this message in a reply
[+] 2 users say Thank You to bryosb for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Making F-series combox work in e-series Ryn079 1 155 9 hours ago
Last Post: Marx
XZBMW Tool for bench read 8hp Garryq 9 1,572 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
  mileage g series virtual bosch id7 tigre 2 219 22-03-2024, 13:00 PM
Last Post: tigre
XZBMW G Series KEY in F34 Rajco 5 362 20-03-2024, 18:56 PM
Last Post: Rajco
XZBMW Solved ✔ Cic update on E series alsamaraee 16 791 28-02-2024, 11:38 AM
Last Post: alsamaraee
XZBMW ENAV2 bench activation Airbus 10 800 25-02-2024, 08:17 AM
Last Post: jb2005
XZBMW ISTA/P is no longer supported for F, G & I series see_you_33 22 5,172 20-02-2024, 04:49 AM
Last Post: Alenorm
  Motronic 3.3.1 bench jaramillo 3 174 13-02-2024, 05:12 AM
Last Post: 2013m5
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content