Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Problem solved
30-05-2017, 15:38 PM,
(This post was last modified: 02-06-2017, 18:37 PM by Clusters.)
Post: #1
|
|||
|
|||
Problem solved
Got a problem disabling front seat airbag on this car , have tried different resistor's from 2,4 ohm up to 2,8 but no result that nagging airbag lamp is still shining bright ?
what do i do wrong , there are 3 wire's black blue and brown , the blue wire is in the middle , how should i connect and any suggestion how many ohm the resisto'r should have . and i have trie'd to remove the fault code each time , fault code i's to high resisition side airbag should be very happy for a solution . |
|||
30-05-2017, 20:18 PM,
Post: #2
|
|||
|
|||
RE: Seat airbag vw t5 -09
Hi,
Give a 2.2 ohm resistor and it will be ok. |
|||
31-05-2017, 02:48 AM,
Post: #3
|
|||
|
|||
RE: Seat airbag vw t5 -09
|
|||
02-06-2017, 17:13 PM,
Post: #4
|
|||
|
|||
RE: Problem solved
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content