[RAMON31]

Hello good afternoon, I have this opel corsa 1.2 petrol engine of 2002. when reading failure comes internal drive failure.
Upload the image obtained by galleto 4 to see if someone tests it and corrects me if there is something wrong. Or does an immobilizer off

[RAMON31]

Does anyone know how to clone this unit with gallet 4 without obd2 ?, ie directly on the drive?

[dil6222]

Does anyone know how to clone this unit with gallet 4 without obd2 ?, ie directly on the drive?

Hello yes you can clone with mpps etc and you can just pinout with wires directly to ecu doesn't have to be through obd I will post wiring diagram for you shortly

Also where you from? I have a few of these ecus and can do programming etc

[RAMON31]

Thank you! I am from Spain.
I have 4 Chinese gallet and Chinese carprog

[RAMON31]

Hey, the diagram? please jeje

[dil6222]

Hey, the diagram? please jeje

Here we go shouldn't need the relay just pinout appropriate power and Kline let me know how you get on? I'll also check if I have this ecu kicking about then i will also try read on bench look for your ecu on document below

http://www.codecard.lt/files/Manuals/ECU...manual.pdf