[lariusmaximus]

Hi guys

2006 1.4 16valve p207

fault for abs
no power steering, no speedo

can anybody tell me how to repair abs module??

kind reards
max

[CHIKODIAG]

HI
furst think you need to do is check your abs power (+12/gnd)
GOOD LUCK

[dynamicsteam]

I had one of these with no ABS in the otherday. You need to check feeds to ABS pump. I found a feed missing and after some checks found the main engine bay fuse box had water damage in centre connector. Needed a new fuse box as connector pin that feed ABS was totally corrode away.. Also changed screen wash pump as this is where the water comes from.

Check all feeds to pump first !

[lariusmaximus]

HI
furst think you need to do is check your abs power (+12/gnd)
GOOD LUCK

thanks friend

have to power to abs pump

---

I had one of these with no ABS in the otherday. You need to check feeds to ABS pump. I found a feed missing and after some checks found the main engine bay fuse box had water damage in centre connector. Needed a new fuse box as connector pin that feed ABS was totally corrode away.. Also changed screen wash pump as this is where the water comes from.

Check all feeds to pump first !

thanks man

i have no power to abs pump

[CHIKODIAG]

HI
if you don t have power in your abs so it is the problem
GOOD LUCK

[dynamicsteam]

If the power is missing check ABS fuse in engine bay fuse box. I think it was fuse 9 but need to check that. I know it's a 10 amp fuse. That fuse supplies wake up to ABS with ignition on. Also there will be MAF fuses under the engine bay fuse box that supply ABS pump with permanent feeds.