[ninja_zx11]

I have a surprise. Managed to make odis 6.6.1 work after adding the engineering project files to the correct folder, and after re choosing the vas5054a interface.

Could you please describe the correct folders?I am also trying to make 6.6.1 to work on my golf.I have downloaded projects.rar but don't know where to put the project data in a proper way.

Did you select engineering and then clicked the green arrow to auto detect the car and modules on odis-e 6.6.1? Thanks

[apoelistas]

Use odis-s 3.0.3 project folders. In odis-e there is a folder option. You use twice the hard disc space otherwise.

[ninja_zx11]

Use odis-s 3.0.3 project folders. In odis-e there is a folder option. You use twice the hard disc space otherwise.

Thanks for the tip!

After trying 6.6.1 ,i installed ODIS-E 6.7.5.So far i am able to connect to the car with my vas5054a but when i go to read the ecu identification or dtc memory in odis-e,I get error as shown in the picture.I believe its related with the projects.My car is 2015 golf 7 TDI and i selected VW37x.Did i select the right project?

Apoelistas, could you please help me to set up odis-e folders?

I tried to look for the folder option in odis-e to use folder from service but i couldnt find it.Is it in Admin--->diagnostic data--->ODX update index file 1?.Thanks

[apoelistas]

Use odis-s 3.0.3 project folders. In odis-e there is a folder option. You use twice the hard disc space otherwise.

Thanks for the tip!

After trying 6.6.1 ,i installed ODIS-E 6.7.5.So far i am able to connect to the car with my vas5054a but when i go to read the ecu identification or dtc memory in odis-e,I get error as shown in the picture.I believe its related with the projects.My car is 2015 golf 7 TDI and i selected VW37x.Did i select the right project?

Apoelistas, could you please help me to set up odis-e folders?

I tried to look for the folder option in odis-e to use folder from service but i couldnt find it.Is it in Admin--->diagnostic data--->ODX update index file 1?.Thanks

I believe with odis-e 6.7.5 you have to use the projects found in odis-s 3.1.3.

That is one way of doing it. Admin--->diagnostic data--->ODX update index file 1

I am using the other method Admin- Save Locations - Diagnostic data - engineering odx projects (...) Target directory. Just select the project directory of odis-s 3.1.3.

In case you have o-e 6.6.1 do the same with odis-s 3.0.3

I am not sure if it will create problems if one tries to use newer project versions than the ones I have paired with above. Not tested. I try to be consistent, to have compatible pdu-api with hardware in hand.

In case you want to install a newer odis-s first install the odis you need for the odis-e version you have, copy the projects to project engineering project folder and then uninstall that odis-s in order to install the newer version you wish. Use new folder directory were you copied the projects to.

[ninja_zx11]

I appreciate your help.Will try as you you described.

---

One more question please.How can i find what's the proper project for my car? eg my car is 2015 golf 7 tdi.

[apoelistas]

I used to have a golf mk5 tfsi. I had to sell it when automatic transmission failed (7 years after purchase).

Guideline check version information. There is a date which is for that purpose.

3.0.3 upto end of ??? Need to check that
3.1.3 upto end of 2016
4.0 upto 2017

Also for finding the code of your car.
E.g. Au48x is for audi Q5 8R

Check the inf or txt in project data. I believe if you use the odis-s project data it will be automatically recognised. Otherwise you need to check your vehicle code in that list.

[ninja_zx11]

I used to have a golf mk5 tfsi. I had to sell it when automatic transmission failed (7 years after purchase).

Guideline check version information. There is a date which is for that purpose.

3.0.3 upto end of ??? Need to check that
3.1.3 upto end of 2016
4.0 upto 2017

Also for finding the code of your car.
E.g. Au48x is for audi Q5 8R

Check the inf or txt in project data. I believe if you use the odis-s project data it will be automatically recognised. Otherwise you need to check your vehicle code in that list.

Thanks apoelistas!! odis-e 6.6.1 with projects from odis-s 3.0.3 worked!! I used vw37x project.

[apoelistas]

Perfect. I am glad too that I could help you out. Thanks for the feedback. That combination works good for me too ( with vcx nano)

[priZrak]

Link to original PROJECTS is attached.