Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Please immo Off this FORD EEC-V - 104 pin
17-06-2017, 13:17 PM,
Post: #1
LFord  Please immo Off this FORD EEC-V - 104 pin
Hello Brothers

please immo off this ecu Ford Mondeo

EEC-V model: PAIN
104 pin out

Thanks!!!


Attached Files Thumbnail(s)
           
Quote this message in a reply
26-08-2017, 23:07 PM,
Post: #2
RE: Please immo Off this FORD EEC-V - 104 pin
Easy with focom or elm327 and forscan, to encode two new transponders
The codes with the calculator incode outcode
The cable is cheap and the procedure is super simple
Quote this message in a reply
[+] 2 users say Thank You to ayllon308 for this post
27-08-2017, 07:56 AM,
Post: #3
RE: Please immo Off this FORD EEC-V - 104 pin
(17-06-2017, 13:17 PM)cleiwil Wrote:  Hello Brothers

please immo off this ecu Ford Mondeo

EEC-V model: PAIN
104 pin out

Thanks!!!

desolder intel N7000 chip and bridge contact 4 with contact 13 there which the chip was. Sometimes it works sometimes not.
Quote this message in a reply
[+] 2 users say Thank You to Dash_Burner for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot IMMO OFF PSA SID 807EVO GTR35 4 94 20 minutes ago
Last Post: k.elmajdouby
  immo off bosch edc15vm+ audi a6 tintoverano 2 12 55 minutes ago
Last Post: tintoverano
ORenult IMMO off Renault Kangoo johann74270 0 14 1 hour ago
Last Post: johann74270
TMisubshi Mitsubishi Pajero E6TO immo off johann74270 2 44 1 hour ago
Last Post: johann74270
  MITSUBISHI L200 E6T01476 IMMO OFF crisvenua2 2 222 4 hours ago
Last Post: johann74270
  Ford dash-ECU synchro vopi 5 35 5 hours ago
Last Post: sokisoki3
0Immo VW Lupo 1.4FSI MED7.5.10 immo off vwdamian 2 20 5 hours ago
Last Post: vwdamian
  VW MED17.5 BAD IMMO OFF victorysatgr 6 63 6 hours ago
Last Post: ROD-BENDERS
  Renault Clio Sirius32 immo off chang2 2 29 6 hours ago
Last Post: sokisoki3
  017 545 71 32, Mercedes, immo off ?? Liteace 0 16 Yesterday, 22:06 PM
Last Post: Liteace

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content