Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DIGIPROG problem with w168 2003
15-02-2014, 16:14 PM,
(This post was last modified: 15-02-2014, 16:33 PM by volavka.)
Post: #1
|
|||
|
|||
DIGIPROG problem with w168 2003
Hi,
I have a chinese digiprog 4.85, i want to repair a tacho from a mercedes w168 2003 with it. I solder the cable and plug it into DP but when i choose HC12 and start it. It indicate after six seconds "INIT ERROR". |
|||
15-02-2014, 16:24 PM,
Post: #2
|
|||
|
|||
RE: DIGIPROG problem with w168 2003
Check cable is wired correctly
|
|||
15-02-2014, 16:31 PM,
Post: #3
|
|||
|
|||
RE: DIGIPROG problem with w168 2003
Me digi no read motorola
|
|||
15-02-2014, 17:16 PM,
Post: #4
|
|||
|
|||
RE: DIGIPROG problem with w168 2003
This is the cable 50 wires picture:
i don't know if the white wire is the green and if the red wire is the brown or black on the tutorial. |
|||
15-02-2014, 18:38 PM,
Post: #5
|
|||
|
|||
RE: DIGIPROG problem with w168 2003
(15-02-2014, 17:16 PM)ISHIKAWA Wrote: This is the cable 50 wires picture: |
|||
15-02-2014, 21:51 PM,
Post: #6
|
|||
|
|||
RE: DIGIPROG problem with w168 2003
(15-02-2014, 18:38 PM)ISHIKAWA Wrote:(15-02-2014, 17:16 PM)ISHIKAWA Wrote: This is the cable 50 wires picture: |