[ISHIKAWA]

Hi,

I have a chinese digiprog 4.85,
i want to repair a tacho from a mercedes w168 2003 with it.

I solder the cable and plug it into DP but when i choose HC12 and start
it. It indicate after six seconds "INIT ERROR".

[teerak2uk]

Check cable is wired correctly

[meroteki]

Me digi no read motorola

[ISHIKAWA]

This is the cable 50 wires picture:

i don't know if the white wire is the green and if the red wire is the brown or black on the tutorial.

[ISHIKAWA]

This is the cable 50 wires picture:

i don't know if the white wire is the green and if the red wire is the brown or black on the tutorial.

[ISHIKAWA]

This is the cable 50 wires picture:

i don't know if the white wire is the green and if the red wire is the brown or black on the tutorial.

[ISHIKAWA]

What are pins for ST50 because the chinese cable don't has good colors ?

[pepesound]

Try to read it with a programmer

[14bogdan]

Can you pls tell me the cip code from your Motherboard from your Digiprog3?See the picture attached to my post 'Digiprog3 update help"Thanks