Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
R270 programmer connection to 160D0WQ
|
15-07-2017, 07:26 AM,
(This post was last modified: 15-07-2017, 07:26 AM by teerak2uk.)
Post: #11
|
|||
|
|||
|
R270 programmer connection to 160D0WQ
Yes it is detected correctly check adaptor from this picture
![[Image: 80ed3a9e6f1e9c06b9ac8fe05d1ef721.jpg]](https://uploads.tapatalk-cdn.com/20170715/80ed3a9e6f1e9c06b9ac8fe05d1ef721.jpg)
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
15-07-2017, 18:23 PM,
(This post was last modified: 15-07-2017, 18:23 PM by rs@chip.)
Post: #12
|
|||
|
|||
|
RE: R270 programmer connection to 160D0WQ
Make your adapter exactly like this one and you will be able to do all chips, iven v6 ones..
|
|||
|
|
|
16-07-2017, 03:18 AM,
Post: #13
|
|||
|
|||
RE: R270 programmer connection to 160D0WQ
(15-07-2017, 18:23 PM)alex.eobd2 Wrote: Make your adapter exactly like this one and you will be able to do all chips, iven v6 ones.. Alex, can u check this picture? do I read numbers correctly?    |
|||
|
|
|
16-07-2017, 08:01 AM,
Post: #14
|
|||
|
|||
|
RE: R270 programmer connection to 160D0WQ
Which Windows do you use
My r270 works on XP but on Win7 he does not work. Anyone have the vaild driver for Win7 ? |
|||
|
|
|
16-07-2017, 11:45 AM,
Post: #15
|
|||
|
|||
|
RE: R270 programmer connection to 160D0WQ
It can work ok on win7
IF MY POST WAS HELPFUL DON'T FORGET TO GIVE ME LIKE AND REPUTATION... THAT WILL KEEP US HELPING OTHER'S
|
|||
|
|
|
16-07-2017, 12:14 PM,
Post: #16
|
|||
|
|||
|
RE: R270 programmer connection to 160D0WQ
Can you share driver for Win7 64bit, i tried also with driveres from this site http://www.silabs.com/products/developme...cp-drivers but don`t got it work
|
|||
|
|
|
16-07-2017, 17:11 PM,
Post: #17
|
|||
|
|||
|
R270 programmer connection to 160D0WQ
Hi, One important fact I need know is the LED will light up with connected to R270 with/without chip? Or only light when 5V is connected to the adapter?
Sent from my iPhone using Tapatalk |
|||
|
|
|
16-07-2017, 23:00 PM,
Post: #18
|
|||
|
|||
|
RE: R270 programmer connection to 160D0WQ
|
|||
|
|
|
18-07-2017, 19:12 PM,
Post: #19
|
|||
|
|||
|
RE: R270 programmer connection to 160D0WQ
Led on 35080 adapter only light when is comand read or write is send to him!!! but see this,when you start r270 softwrare you wil hear tre beep and in up corner you will see serial ,,,ofcorse if you input in instalation one of leters from serial!!!if you start without problem and you hear beeps than is problem in adapter!!!from expirince i know that plastic device is not trusted,,i have tre pic ,,,two metal and one plastic ,each work great!!!
VAG ,PSA,Renault ,FIat IMMO solutions!!BMW solutions!! Volvo solutions!! Audi BCM2 repair !!MB SCN !! Diag tools repair !!Cluster solutions!! CAS / FEM / BDC Recovery !!
|
|||
|
|
|
18-07-2017, 20:51 PM,
(This post was last modified: 18-07-2017, 20:52 PM by Avtoprofi.)
Post: #20
|
|||
|
|||
|
RE: R270 programmer connection to 160D0WQ
Try change from comport 10 to 1 or 2
 And yes , it works on windows 7 32bit 100% Stop worrying about what can go wrong, and get excited about what can go right.
PRESS THANKS IF YOU LIKE MY POST AND IT HELPED YOU  |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
