Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Psa Edc17c10 stage 1
20-07-2017, 23:53 PM, (This post was last modified: 21-07-2017, 00:03 AM by rs@chip.)
Post: #1
Psa Edc17c10 stage 1
Hi to all tuners.. hi can anyone provide stage 1 for berlingo 1.6 hdi?here my ori file edc17c10 with lauzy 90 hp biggrin thanks a lot cheers


Attached Files
EDC17c10_ori.rar
File Type: .rar
Downloaded: 66 times
Size: 938.62 KB

Quote this message in a reply
21-07-2017, 10:26 AM,
Post: #2
RE: Psa Edc17c10 stage 1
(20-07-2017, 23:53 PM)alex.eobd2 Wrote:  Hi to all tuners.. hi can anyone provide stage 1 for berlingo 1.6 hdi?here my ori file edc17c10 with lauzy 90 hp biggrin thanks a lot cheers

I have tested and good solution on PSA engine.

If you need let me know.

Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself
Tuning - DPF Off - EGR Off - or any etc

Certificated WinOLS Trainer
Quote this message in a reply
25-07-2017, 14:36 PM, (This post was last modified: 25-07-2017, 14:40 PM by rs@chip.)
Post: #3
RE: Psa Edc17c10 stage 1
I wait some time if anyone can help me with this one..becouse usualy I dont do edc17 psa but I made a tune anyway and results was good on the road..here is my file made with map3d if anyone need it in future like I did biggrin

no pass


Attached Files
EDC17c10_MOD MAP.rar
File Type: .rar
Downloaded: 69 times
Size: 938.53 KB

Reputation: +1 - CHIKODIAG [+1]
Quote this message in a reply
[+] 10 users say Thank You to rs@chip for this post
25-07-2017, 17:12 PM,
Post: #4
RE: Psa Edc17c10 stage 1
I think your job has a lot of smoke !!!

fap/egr/swirl/dtc/tuned/immo....etc...
Quote this message in a reply
[+] 2 users say Thank You to max40 for this post
25-07-2017, 21:10 PM, (This post was last modified: 25-07-2017, 21:12 PM by rs@chip.)
Post: #5
RE: Psa Edc17c10 stage 1
(25-07-2017, 17:12 PM)max40 Wrote:  I think your job has a lot of smoke !!!

No mate..it run perfect without any extra smoke..I test it myself. but if you have better solution post it here
Quote this message in a reply
[+] 1 user says Thank You to rs@chip for this post
25-07-2017, 23:18 PM,
Post: #6
RE: Psa Edc17c10 stage 1
(25-07-2017, 21:10 PM)alex.eobd2 Wrote:  
(25-07-2017, 17:12 PM)max40 Wrote:  I think your job has a lot of smoke !!!

No mate..it run perfect without any extra smoke..I test it myself. but if you have better solution post it here

yes alex i agree,,,if sum one has better for free then post up
if not .silent or seliing can be done in market place

i help who i want! when i want to! otherwise dont ask free stuff
72656d617020726f73732068656c707320616c6c20746861742068656c7073206d65
genuine winols check click here
Reputation: +1 - rs@chip [+1]
Quote this message in a reply
[+] 2 users say Thank You to Remap Ross for this post
26-07-2017, 06:18 AM,
Post: #7
RE: Psa Edc17c10 stage 1
(25-07-2017, 14:36 PM)alex.eobd2 Wrote:  I wait some time if anyone can help me with this one..becouse usualy I dont do edc17 psa but I made a tune anyway and results was good on the road..here is my file made with map3d if anyone need it in future like I did biggrin

no pass

I can understand why he says too much smoke.

please take out the section of the Injection Timing. its too much, change maximum %5 on it and half column that you tuned.

also check smoke limitors again.

and make sure that rail pressure limitor.

cheers brother

Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself
Tuning - DPF Off - EGR Off - or any etc

Certificated WinOLS Trainer
Reputation: +1 - rs@chip [+1]
Quote this message in a reply
[+] 2 users say Thank You to Powerlab for this post
26-07-2017, 07:30 AM,
Post: #8
RE: Psa Edc17c10 stage 1
(26-07-2017, 06:18 AM)serencebey Wrote:  
(25-07-2017, 14:36 PM)alex.eobd2 Wrote:  I wait some time if anyone can help me with this one..becouse usualy I dont do edc17 psa but I made a tune anyway and results was good on the road..here is my file made with map3d if anyone need it in future like I did biggrin

no pass

I can understand why he says too much smoke.

please take out the section of the Injection Timing. its too much, change maximum %5 on it and half column that you tuned.

also check smoke limitors again.

and make sure that rail pressure limitor.

cheers brother
its not bad for attempt from alex if he done himself,,,but need work

i help who i want! when i want to! otherwise dont ask free stuff
72656d617020726f73732068656c707320616c6c20746861742068656c7073206d65
genuine winols check click here
Reputation: +1 - rs@chip [+1]
Quote this message in a reply
[+] 2 users say Thank You to Remap Ross for this post
26-07-2017, 12:06 PM,
Post: #9
RE: Psa Edc17c10 stage 1
(26-07-2017, 07:30 AM)Remap Ross Wrote:  its not bad for attempt from alex if he done himself,,,but need work

I am totally OK about it.

he was try to make it by himself, just try to show the correct way arround to make it more proper smile

Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself
Tuning - DPF Off - EGR Off - or any etc

Certificated WinOLS Trainer
Reputation: +1 - autoport [+1]
Quote this message in a reply
[+] 2 users say Thank You to Powerlab for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi A4 B7 2.0TDi egr and stage 1 guciek 2 46 Yesterday, 12:11 PM
Last Post: guciek
  Mercedes Viano CRD2 stage 1 Hazerssmurf 2 29 Yesterday, 10:19 AM
Last Post: Hazerssmurf
  bmw edc17cp45 need stage 1 pls Hazerssmurf 1 48 15-05-2024, 22:50 PM
Last Post: gkogkolos
  volkswagen passat 1.6 tdi 120cv stage 1 pistolo30 2 54 15-05-2024, 16:25 PM
Last Post: gkogkolos
  ford mondeo mk4 1.8 tdci i need stage 1 mazioallegro 1 40 13-05-2024, 12:54 PM
Last Post: pistolo30
  chrysler 300c stage 1 CRD murkutis 1 76 13-05-2024, 11:58 AM
Last Post: Ugaero97
  bmw f11 2.0 184 hp stage 1 please florinu 2 76 13-05-2024, 11:41 AM
Last Post: Ugaero97
  MK7 EDC17C64 Stage 1 borisp 2 122 12-05-2024, 20:51 PM
Last Post: gkogkolos
XZBMW BMW E90 320d N47 Stage 1 +EGR off kindly requested InvictusBMW 2 115 09-05-2024, 15:46 PM
Last Post: InvictusBMW
XZBMW edc17c50 stage 1 req murkutis 1 50 09-05-2024, 11:59 AM
Last Post: rece1p23

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content