Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DIGIPROG 3 user help thread !
10-07-2018, 16:11 PM,
Post: #381
RE: DIGIPROG 3 user help thread !
Hi,

Does anyone have digiprog for FA9C60160000?

Thanks in advance smile
Quote this message in a reply
10-07-2018, 16:45 PM,
Post: #382
RE: DIGIPROG 3 user help thread !
Your file.......


Attached Files
FA9C60160000.rar
File Type: .rar
Downloaded: 31 times
Size: 150 bytes

Reputation: +1 - miler80 [+1]
Quote this message in a reply
[+] 1 user says Thank You to darek_naprawa for this post
26-07-2018, 17:55 PM,
Post: #383
RE: DIGIPROG 3 user help thread !
Need help on 2007 Nissan navara

[quote='darek_naprawa' pid='354323' dateline='1531241156']
Your file.......
Need help on using digiprog3 on Nissan navara 2007
Quote this message in a reply
27-08-2018, 01:56 AM,
Post: #384
RE: DIGIPROG 3 user help thread !
Hi guys, I have recently sold my Junk Digimaster 3, and im planning to buy an affordable Digiprog, I was curious if its worth buying just the Unit, both clips for eeprom and the OBD cable?

OR

buy the entire kit will ALL the cables..
Quote this message in a reply
30-09-2018, 18:01 PM,
Post: #385
RE: DIGIPROG 3 user help thread !
(21-12-2013, 12:05 PM)octav_kiss Wrote:  For vito 2004 work?

for fiat stilo 1.9 mjet since 2006 does it work?

for fiat stilo 1.9 mjet since 2006 does it work?
Quote this message in a reply
08-10-2018, 12:33 PM,
Post: #386
HPorshe  RE: DIGIPROG 3 user help thread !
(20-12-2013, 20:28 PM)alen016 Wrote:  Cars that work:

Audi A4 09 diag, 2011
Ford Focus diag,
Peugeot E7 BSI and dash,
Fiat Doblo diag,
Honda Accord,
Peugeot 407 06,
Peugeot 406 bsi and dash,
ford Transit
Just done a merc 204 and 212 Diagnostic mileage and assyst
A4 I did one yesterday
merc 204 212 tried and tested
Audi A3 2006 Diag
Mercedes 212 Diag
Mercedes 204 Diag
Mercedes 204 assyst Diag
Mercedes Vito MM Diag
Ford Focus 2008 to 2011 Diag
Ford Fiesta 2008 up Diag
Ford Mondeo 2008 Diag
Fiat Doblo Diag
Nissan Navara 9S12
Peugeot 307 912 BSI
Peogeot 307 95160 BSI
Old Toyota Avensis Diag back of cluster
Seat Leon 2006 Diag
Toyota Dyna contact points using Hiace
Volvo V70 Diag
Volvo V70 error clear
focus 2011 diag
Porsch CAYENNE
2002-2010 (diag and 24c08)
2010-up -only 95640 eeprom
New Volvo goes by OBD tried and tested
2008 up I did V70 the other day and error clear works
Even on 211 you cant make assyst by OBD
Astra-j (2009) works OK via OBD
VW Passat 2007 works OK via OBD
Astra-H works OK via CHIP
Audi A8 2007 works OK via OBD
Ford C-Max and S-Max work OK via OBD
Ford Fiesta & Focus works OK via MCU, not Dash Connector ?!?!
Golf 3 & Golf 4 works OK via dash connector and via OBD
Reading 93Cxx, 24Cxx, 95xxx, 912, 9s12 works OK.
Vw T5 DASH -2009 OBD OK
EDC16 T5 - 2009 OBD OK
VW T5 DASH 2005 OBD OK
EDC T5 -2005 OBD OK
CADDY 2009 -OBD OK
bMW 5 - BY DASH PLUG 1998 OK
SKODA SUPERB- 2007 OBD OK
BMW CAS 2 (2004) BY CAS PLUG OK
Golf 6 2009
renault megane 3 only dash ,abs 95160 does not work
Golf 5 2005 2006 2007
Seat leon 2007
peugeot 207 95128 but you must select citroen C3 menu
Skoda fabia 2001
clio 3 2009
c4 2006
i try ford smax work fine i think with fords work fine
Volvo S 80 from 2009 done in 5 minutes,
vw eos 2007 in menu -2009 (1F) dignostic
read and change km in tacho and DSG
t5 by obd worck ok,dash and edc
citroen c2 dash & bsi ok
galaxy 04 plate ok
mondeo 04 ok
golf mk 5 06 ok
Golf 5,2008 ok,
golf 6 2011 ok,
ford focus 2007 ok,
t5 ok,edc 16 ok,
seat leon 2007 ok
BMW E46 by 20 pin DLC work ok year 2000
Insignia work by Eprom direct,OBD get acces denied
Mercedes 2008 by OBD work ,dash only!
Nissan quascai 2008 by eprom direct working
tested on 211 2008 work with flashing option(block syncro with EZS in dash flash)
audi a4 ,2.7 benz, 1999 year!
93lc66 , b5-dash 8d0 vdo with BC!!!!!
audi a4 1994-2001
audi11/97-
diagnostic connect,not read old km write new km ok
2011 ford focus like a dream obd2
golf4 19tdi 2000year
Rb4 audi a4 make today ,worck like a charm,
seat ibiza 2004 the same worck ok
skoda octavia with nec inside work ok by obd
T4 2006 obd ok (meni:vw T4 98-/diagnostic connect,not read old km write new km ok)
jumper 2008 obd ok read old km write ok
Peugeot 406 VDO Dash done by cluster conector...ok
Focus 2001 Done with cluster connector .............ok
Audi A3 ,2000 year, M73 works OK via OBD
mb w204 2011 obd2 work ok take 2 min cleare error work ok
Passat 2012
Fiesta 2011
Fiesta 2008
tested on audi A8 4E-work ok;
ford focus 2010-OK ;
tuareg RB8 dash-ok and EDC16-OK
2009 Audi R8 done OK
2009 Insignia done OK
Chrysler 300C
2008 Mondeo Colour screen
did mb w204 2010 w212 2011 2 min joob done. work very good.
insignia 2010 by obd 1min job
audi a4 2008 .... by obd 30min job
audi a6 2004.... not from first try but ok (q7 the same )
audi a3 2003.... obd 1min job
mb ml 1999 obd ok
a4 1996 vdo obd ok
volvo xc 70 2008... obd ok
focus 2008 obd ok
sharan ....2001 with and without bord cpu obd ok
mercedes w 204 2009 year
W204 © – EZS - DIAG ok , 2 min
W204 © - TACHO - DIAG ok, 2 min
W204 © - ASSYST - DIAG ok, 15 min
Tested ok on vw polo 2007 crypto
punto 2004 old shape
seat cordoba 2003 old shape
scenic 2004 johnson control with c56
e60 dash with 35080 eep all ok.
mazda bt50 2009 ok
ford escape 2008 OBD ok
vw golf 6 ,2011 , VDO tacho obd 2 min !!ok!!
for the audi a4 2008 demand 1 min for reading and 30min for writing
a4 2008 30min job work ok by obd
I did a Audi A8 with Digiprog clone by obd the other day... worked perfect... it was 2008.
Vw polo 6r 2011 obd OK
VW lupo obd OK
Vw passat B6 -2008 obd OK 1min
Tested on VW Passat EDC16, working
Golf4 vdo ok edc 15 not work
tested on a 2001 corsa and all ok
try it the golf 5 ecu works diag
I read and write to obd VW T5 2007-8 year tacho and edc16


Cars that not work:

with dp3 cas 3+ work try obd with out any problem.
cas2 with dp3 dont work i try like 11 cars no luck
e65 with dp3 obd dont work.
Freelander 2 2008 wrong calculation
the only one not on is Audi A1
jeep cherokie 2004 908as60 plug 42 not work
VW polo 2005 dash VDO not work
Audi A6 2003 dash not work
Audi A6 2005 dash work( test only if is read i not change it)
VW T5 EDC16 read km ok by OBD,write ... but km still not change,i removed ECU and mod eeprom
vw lupo 2002 with rb 4 dash not ok
get message "unknown version rb4"
try old 912 bsi 307 with this tool and now bsi dead
fiat punto 2000 read good milleage when programming is finished it says verify new milleage but milleage still the same
Tested on Audi A4 EDC16, not working.
Ibiza 2007 dash MM with 912h256 inside, can't do by OBD
MERCEDES A-CLAS - 2000 OBD NOT OK  (Mm)

PORSCHE CAYENNE 2012 WORK?
THANKS A LOT drive
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to ipcsr76 for this post
24-10-2018, 21:59 PM,
Post: #387
RE: DIGIPROG 3 user help thread !
Hi.
I did it with DIGIPROG 3 Audi A3 2005. But when I check with the program VCDS, I can see that the mileage is not real. Is it possible to do something so that the mileage cannot be checked?
Thanks. smile
Quote this message in a reply
07-11-2018, 15:24 PM,
Post: #388
XZBMW  RE: DIGIPROG 3 user help thread !
(24-10-2018, 21:59 PM)Businessrm Wrote:  Hi.
I did it with DIGIPROG 3 Audi A3 2005. But when I check with the program VCDS, I can see that the mileage is not real. Is it possible to do something so that the mileage cannot be checked?
Thanks. smile

Hi Businessrm, you have to correct also the mileage stored in ECU.
I use FVDI to do that by odb.
Quote this message in a reply
13-12-2018, 10:58 AM,
Post: #389
RE: DIGIPROG 3 user help thread !
Hello. I have a 10/2014 Seat Ibiza. Can I use a Digiprog V04.88M/150113 to correction the mileage in all ecu's by obd?
Quote this message in a reply
14-12-2018, 13:52 PM,
Post: #390
RE: DIGIPROG 3 user help thread !
(13-12-2018, 10:58 AM)Master_Heinrich Wrote:  Hello. I have a 10/2014 Seat Ibiza. Can I use a Digiprog V04.88M/150113 to correction the mileage in all ecu's by obd?

Not Possible. That car is newer. Better use X300m Obdstar for this one.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
0Dash IProg+ & IProgPro suppot/Feedback thread volavka 154 124,683 21-12-2023, 22:31 PM
Last Post: al70
0Dash X-tool suppot/Feedback/backup thread volavka 243 117,942 23-09-2023, 05:57 AM
Last Post: canisha
0Dash MTool Mileage Correction suppot/Feedback thread volavka 58 42,702 23-08-2023, 04:40 AM
Last Post: efgiar
  Digiprog 3 590C8F0E0000 darek_naprawa 6 9,887 28-12-2022, 13:10 PM
Last Post: darek_naprawa
PPeugeot Can anyone tell me or send me to a thread on how to correct Mileage of a Peugeot 406? tomay3000 6 2,355 18-10-2022, 07:50 AM
Last Post: Diagcar
  Solved ✔ Ford Focus 1998-2002 Digiprog 3 ST27 Error alexturbo 3 1,605 08-10-2022, 20:55 PM
Last Post: alexturbo
0Dash Smok UHDS Support/Feedback/Backup Thread volavka 138 59,549 26-04-2022, 17:54 PM
Last Post: rehatflogs
XZBMW need help, bmw e46 change vin nr in instrument cluster with digiprog 3 Stitch 5 1,482 20-09-2019, 20:56 PM
Last Post: YoungElectronic
  digiprog 3 mercedes w245 clase b javi225 6 2,028 05-06-2019, 21:19 PM
Last Post: javi225
YTMercedes Mercedes Vito W639 Mileage KM Help Digiprog Fraz 7 10,636 12-03-2019, 22:20 PM
Last Post: nek13

Forum Jump:


Users browsing this thread:
8 Guest(s)

Return to TopReturn to Content