Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DIGIPROG 3 user help thread !
19-02-2014, 10:30 AM,
Post: #51
|
|||
|
|||
DIGIPROG 3 user help thread !
Hi Guys,
When I connect to a 2004 Touareg it connects and reads but stops and displays 'Unknown Error' It connected once, reset the klm to 0... Now won't let me change the klms.. Help!!!!! |
|||
19-02-2014, 12:53 PM,
Post: #52
|
|||
|
|||
DIGIPROG 3 user help thread !
Correction it says 'Unknown Version' whilst reading and stops at '3F0'
|
|||
21-02-2014, 23:17 PM,
Post: #53
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
Don't think it works. but try it anyway. disconnect battery, maybe it resets itself.
the plug is connected good to the digiprog? I had one time, plug was not good connected, so it got power by obd but didnt connected to car. |
|||
21-02-2014, 23:32 PM,
Post: #54
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
(21-02-2014, 23:17 PM)levinio18 Wrote: Don't think it works. but try it anyway. disconnect battery, maybe it resets itself. Friend welcome to Garage Automotive First of all >>READ THE RULES<< Then your first post should be >>HERE!!<< |
|||
Reputation: +2 - volavka [+2] | |||
28-02-2014, 16:46 PM,
Post: #55
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
I have a question
Does anyone driver for digiprog 3?? another question...Does anyone know how I can use the function to change km to edc 16 audi a4-audi a6 2004-2006??? I tried the function edc 16 vw touran,vw passat 2004-2008. read correctly but does not change km. someone used bmw cas 2 or 3?work ok? it is possible to save the data read by OBD? Thank.wait a response |
|||
28-02-2014, 18:31 PM,
Post: #56
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
(28-02-2014, 16:46 PM)octav_kiss Wrote: I have a question Hi i did try bmw cas 3 but it say no connection on odb! And it won't work change the milage on chip in odometer. It only will be more mile if you change. I did buy a bmw cas4 programmer cheap from ebay and it worked. Audi a8 worked perfectly only 1minute and done! By odb . |
|||
08-03-2014, 17:42 PM,
Post: #57
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
Hi,
I have one digiprog 4.85 and i woul like to calibrate the touchscreen. The issue is that is asking for a password when i am triing to access setup - calibrate. Done anyone tried to eneter in tham menu . I have tried with passord "1" but is not working. |
|||
09-03-2014, 18:02 PM,
Post: #58
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
I just ordered china digi and tried MB w211. I enter desired mileage but digi put higher value, like this :
1000 = 106054 10000 =129654..... Someone told me that my digiprog fw nit patched. How can solve this? Thanks |
|||
12-03-2014, 23:03 PM,
Post: #59
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
(09-03-2014, 18:02 PM)ziko Wrote: I just ordered china digi and tried MB w211. I enter desired mileage but digi put higher value, like this : Hy, i have a problem like you on WW CAddy2005 , Audi A6 2007 MB W211 ... anybody have a answer ? |
|||
13-03-2014, 11:32 AM,
Post: #60
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
(12-03-2014, 23:03 PM)dragosh12 Wrote:(09-03-2014, 18:02 PM)ziko Wrote: I just ordered china digi and tried MB w211. I enter desired mileage but digi put higher value, like this : Was it connected obd ?? I did try BMW e90 EEPROM but it just got more miles. Then I read that BMW chips do not set down mile only higher. Maybe it's the same ? Tell me if you did it from obd |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Return to TopReturn to Content