[CanOfWorms77]

210c is for f25. For other chassis is different

Thank you, how would I know what is the correct software level?,
Just flash it and check?, I can always revert it back to bmw software

[danyro]

As long hwel is black and the sw is different than the stock one, it should be ok. Fa must contain sa 920 if i am not wrong.
If it was succesfull, you will see gear numbers in kombi displayed e.g D1 D2 etc

[Fatalix]

Can anyone help me with a f31 330d no xdrive from 0712? Tried 3L51 type and 920, 9xa to vcm but no HWEL or swfl change in svt calculating.
Over tv is possible. Thanks

[hulahans]

Sent you already pn

[s3000]

i tried this car:
F31 330d (no xdrive), prod. date 2012-11-08

i add to vo:
931, 920, 9XA

type: 3E51
prod. date: 1112
Factory ilevel: F20-12-11-502

but no HWEL or swfl change after calculating.

I have taken original Factory ilevel, Was that my fault and that's too old for f31 alpina egs software?

[hulahans]

try prod date 0313

[Fatalix]

Preparing to flash a F25 30d from 2012. Is typschlussel WY71 and build date 0316 correct? Been reading quite different things in this topic..

[danyro]

I did my F25 with wy71 0316 plus alpina VOs codes and it worked. As long as you have thw new swfl 210c on egs and hwel is black, you can proceed with flashing

[Fatalix]

I did my F25 with wy71 0316 plus alpina VOs codes and it worked. As long as you have thw new swfl 210c on egs and hwel is black, you can proceed with flashing

Did u have to code EGS with orig VO after, or isnt this neccesary as long as you use x3 software?

[danyro]

I did vo code just to be sure that it is configured according to my car options like 2tb sa etc