Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Remove CCC from ISTA-D module tree
03-08-2017, 06:00 AM,
Post: #1
|
|||
|
|||
Remove CCC from ISTA-D module tree
I did a CCC to CIC retrofit on a 07 335i. All is working well except I have a little annoyance when it comes to scanning the car with ISTA-D. ISTA-D takes forever to read and it shows CCC modules in red (no communication) in the module tree as they are no longer present.
Also when ISTA-D is identifying the vehicle, the CIC unit restarts itself. 1) Anyone know if CCC can be removed from module tree so ISTA-D will not try to find them anymore? 2) Anyone know why CIC restarts when IsTa-D is identifying vehicle? Thanks. |
|||
03-08-2017, 06:32 AM,
(This post was last modified: 03-08-2017, 06:32 AM by Loliceman.)
Post: #2
|
|||
|
|||
RE: Remove CCC from ISTA-D module tree
You need to change the I-level (shipment) inside Tool32 E89.prg
If you set I-level shipment to a I-level when CCC was replaced by CIC for cars with 609, or higher. ISTA will not look for CCC related modules anymore. Try it at your own risk. I'v used it several times with no issues. See link below for some guidance. |