[Nixer]

I would delete times 609 and 6VA from the FA.
And then start ISTA / P.

will try that..but I believe I need at least 6VA for CiC to be recognized.
W 609 NAVIGATION CCC //63+!667] NAVIGATIONSSYSTEM PROFESSIONAL ?Risiko: nur mit SA 676 oder 677

will try and update.

---

Removing SA609 didn't help. When I launched ISTA-P, it reported that few modules including CIC and CID were found but the vo doesn't have corresponding entries.

[sebastianfernandes]

Afaik i-level needs to be updated in cas&frm.. Read it a while ago.. istufe_lessen and istufe_scrieben
hope it helps..

[Nixer]

I updated the factory I-level to something newer like E89x-09-09-500 and E89x-09-03-500....then ISTA-P shows errors on almost all modules including Junction box, FZD, Kombi etc..but ISTA-D shows no errors and displays the modules tree correctly.

---

Don't know if it will work... Just to make it short, delete your previous scans/sessions in ista-d with that vin. Maybe it is stored on the computer.. try it you have nothing to loose..

Tried this as well... ISTA-D has no issues showing the correct modules if I updated the factory I-level...ISTA-P is the trouble.