[sauzee]

Managed to install v5.02 but i cant connect to the ecu the light next to the version number only flashes briefly and says no communication is the light supposed to stay green when connected or am i missing something in the activation
I have to put the vin in manually and i am told no communication with the vehicle
Any help please
Thanks

[obdstart]

Use the PSA Interface Checker then put firmware "APPLI 4.2.4 DB.com" then you can use PSA interface with version 5.02
Also you can make update Diagbox software to version 5.29 and this will be also work, this is last version for work with this firmware...

[sauzee]

Use the PSA Interface Checker then put firmware "APPLI 4.2.4 DB.com" then you can use PSA interface with version 5.02
Also you can make update Diagbox software to version 5.29 and this will be also work, this is last version for work with this firmware...

Thanks for your reply i checked the firmware it is as you have said i still can't get it to connect to the ecu does it have a problem connecting to picasso hdi i have an Autocom it connects no problem.The light next to the version (5.02) is that supposed to stay green as mine flashed briefly and when you put the cursor over it you get no communication.I might have to try it on another car.If you can let me know what lights should be on when connected will be greatly appreciated the light on the interface stays green when plugged into USB
Thanks for your help
Sauzee

[lurchy666]

My china clone works up to 7.24 ( I only have installed up to this as don't need newer at minute) but the clone I got was sent out with the 6.01 software about a year and a half ago, i got told over on frenchcarforums that if you can run 6.01 you can run at least 7.01/7.02

[mattydr67]

If your tool was allready flashed with "C" serial not fake one then you are able to use the tool with any PSA softwears ( Lexia3, PP2000 Diagbox v5.xx, v6.xx, v7.xx )
If you have not a flashed tool with old "B" serial then you can use it in one cars and in other you dosen't. For the one reason ...the "B" chinese tool serial it is blacklisted in firmwears after Diagbox v5.29
Good luck

[lurchy666]

Mine was the b firmware and it ran up to 7.24 then I got told nlc's email details and for some beer tokens he updated mine to c firmware, maybe I was just lucky with my b firmware, I've been told over on a Peugeot forum not to give out nlc's email address ( not that I've still got it anyway), but while I was searching I found the following page http://www.easydiagnostics.co.uk/#/lexia...4578577660

and they do the lexia update for £20 but they don't do guarantees that it'll work on chineese clones,

[mattydr67]

That's one use Mr. NLC firmwear by Team View
As I said even you have a B serial in some cars and only using Diagbox not Lexia or PP2000 from Diagbox you are able to do "something"
The B serial it is blacklisted in firmwear after 4.2.2
Maybe you was lucky and you was able to use it in your projects but not full
If you have C serila now you can smile
Good luck

[sauzee]

Mine was the b firmware and it ran up to 7.24 then I got told nlc's email details and for some beer tokens he updated mine to c firmware, maybe I was just lucky with my b firmware, I've been told over on a Peugeot forum not to give out nlc's email address ( not that I've still got it anyway), but while I was searching I found the following page http://www.easydiagnostics.co.uk/#/lexia...4578577660

and they do the lexia update for £20 but they don't do guarantees that it'll work on chineese clones,

Thanks for that i found that site by accident so as soon as i get a chance i will try them
sauzee