ATTENTION !! Users which have not any posts were deleted !
  1. File Service

  2. MOD-FILES

  3. Powerlab

  4. HEXPROG



MPPs v21 clone
03-08-2017, 09:29 AM,
Post: #1
0Dash  MPPs v21 clone
I have brought mppsv21
Working well with can bus . boot mode and multi boot. But Kline not stable . dose some one have schematics for this clone    
I will attach v21 software if some one provide schematics
Quote this message in a reply
[-] The following 3 users say Thank You to itrescuer for this post:
  • autoprogarage, autoprogarage, autoprogarage
13-08-2017, 18:11 PM,
Post: #2
RE: MPPs v21 clone
(03-08-2017, 09:29 AM)itrescuer Wrote:  I have brought mppsv21
Working well with can bus . boot mode and multi boot. But Kline not stable . dose some one have schematics for this clone
I will attach v21 software if some one provide schematics

for better k-line try to replace L9637 chip with hq one..picture I have only this.. under


Attached Files Thumbnail(s)
       
Reputation: +3 - ROD-BENDERS [+1] , Remap Ross [+1] , kila68 [+1]
Quote this message in a reply
[-] The following 20 users say Thank You to rs@chip for this post:
  • asto, BMW Coding, BMW Coding, BMW Coding, BS68, Enabled, Enabled, Enabled, kila68, kila68, kila68, KRIS-CAR, KRIS-CAR, KRIS-CAR, Remap Ross, Remap Ross, Remap Ross, ROD-BENDERS, ROD-BENDERS, ROD-BENDERS
23-08-2017, 02:30 AM, (This post was last modified: 23-08-2017, 02:31 AM by obdtool.)
Post: #3
MPPS v21 PCB Schematics
Yes, agree with alex.eobd2
actually, it's MPPS V18 PCB Schematics, but also applies to MPPS V21


Attached Files
MPPS PCB Schematics.txt
File Type: .txt
Downloaded: 238 times
Size: 64 bytes

Reputation: +2 - ROD-BENDERS [+1] , maxeugen1 [+1]
Quote this message in a reply
[-] The following 22 users say Thank You to obdtool for this post:
  • BMW Coding, BMW Coding, BMW Coding, BS68, Enabled, Enabled, Enabled, kevin22, kevin22, kevin22, KRIS-CAR, KRIS-CAR, KRIS-CAR, maxeugen1, maxeugen1, maxeugen1, Remap Ross, Remap Ross, Remap Ross, ROD-BENDERS, ROD-BENDERS, ROD-BENDERS
23-08-2017, 03:25 AM,
Post: #4
RE: MPPs v21 clone
My MPPS v21 is coming in as well. I will update if there is any k-line instability.
Quote this message in a reply
[-] The following 3 users say Thank You to Enabled for this post:
  • ROD-BENDERS, ROD-BENDERS, ROD-BENDERS
26-09-2017, 21:37 PM, (This post was last modified: 26-09-2017, 22:34 PM by Enabled.)
Post: #5
RE: MPPs v21 clone
I received my V21, and I only use it with V18 software, because of V21 software problems...

It does not connect to any K-line (EDC15 VW Bora TDI) or any CANBUS (Mercedes Sprinter 3.0 CRD V6 EDC16).
It says ecu not found after trying to communicate for 15 seconds.
Tricore with breakout not working either.

Any ideas what I can check? My interface and software communicate correctly. My interface looks 100% like the one in post 1.

I did not even get to use it one time.

"ECU Not Found" on everything.
Quote this message in a reply
27-09-2017, 04:24 AM,
Post: #6
RE: MPPs v21 clone
(26-09-2017, 21:37 PM)Enabled Wrote:  I received my V21, and I only use it with V18 software, because of V21 software problems...

It does not connect to any K-line (EDC15 VW Bora TDI) or any CANBUS (Mercedes Sprinter 3.0 CRD V6 EDC16).
It says ecu not found after trying to communicate for 15 seconds.
Tricore with breakout not working either.

Any ideas what I can check? My interface and software communicate correctly. My interface looks 100% like the one in post 1.

I did not even get to use it one time.

"ECU Not Found" on everything.

HI,
my v21 ( software v18 )also has the same problem.
Quote this message in a reply
27-09-2017, 06:38 AM,
Post: #7
RE: MPPs v21 clone
(26-09-2017, 21:37 PM)Enabled Wrote:  I received my V21, and I only use it with V18 software, because of V21 software problems...

It does not connect to any K-line (EDC15 VW Bora TDI) or any CANBUS (Mercedes Sprinter 3.0 CRD V6 EDC16).
It says ecu not found after trying to communicate for 15 seconds.
Tricore with breakout not working either.

Any ideas what I can check? My interface and software communicate correctly. My interface looks 100% like the one in post 1.

I did not even get to use it one time.

"ECU Not Found" on everything.
Buy v18.V21 not working properly .
Quote this message in a reply
27-09-2017, 07:09 AM,
Post: #8
RE: MPPs v21 clone
I bought V18, but I got V21 (so written on the device) with v18 software.
The seller offered to send a new type to replace myself biggrin
Quote this message in a reply
27-09-2017, 07:39 AM,
Post: #9
RE: MPPs v21 clone
Send to seller and buy v18_1.08.21
Quote this message in a reply
27-09-2017, 09:07 AM, (This post was last modified: 27-09-2017, 09:08 AM by yellowstilo.)
Post: #10
RE: MPPs v21 clone
I had the same problem with my MPPS v18 (with V21 sticker !) - it dit not connect to any ecu (ecu not found) but it worked ok on V21 software , i expected it to block after aprox. 10 read-write cycles but after aprox. 18 cycles it's still working ok....
I still keep in mind i can be blocked any moment but for now it works ok on V21 !
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZVW EDC15P clone smurfauto 7 219 14-09-2020, 10:34 AM
Last Post: Turbov8
XZBMW BMW ME9.2 Clone syrus 7 1,991 26-08-2020, 07:37 AM
Last Post: syrus
  Delphi DCM3.7 VW read/write by kess v2 5.017 clone? pieros_net 3 486 22-08-2020, 19:14 PM
Last Post: giiintas
  Edc16 c9 opel astra error during writing how to clone ecu andi1571 5 246 12-08-2020, 10:10 AM
Last Post: flamuri
  KESS v2 Clone Problem with EDC16CP35 GorylAliasGonzo 9 2,952 11-08-2020, 13:42 PM
Last Post: TilQ34
  Reading with clone tools. miasma1977 5 353 11-08-2020, 10:13 AM
Last Post: miasma1977
ZTAudi Ktag clone read edc17c74?? gaitnieks321 3 635 06-08-2020, 14:19 PM
Last Post: Bartelbee
LFord help to back up or clone ford explorer ecu pal006a 0 184 24-07-2020, 10:04 AM
Last Post: pal006a
  EDC16C(3)9 by MPPS? walshy155 1 555 20-07-2020, 15:45 PM
Last Post: florinu
  Kess v2 Eu clone problem Leaking 11 1,041 08-07-2020, 22:33 PM
Last Post: Jurebv

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content