Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

MPPs v21 clone
03-08-2017, 09:29 AM,
Post: #1
0Dash  MPPs v21 clone
I have brought mppsv21
Working well with can bus . boot mode and multi boot. But Kline not stable . dose some one have schematics for this clone    
I will attach v21 software if some one provide schematics
Quote this message in a reply
[+] 2 users say Thank You to itrescuer for this post
13-08-2017, 18:11 PM,
Post: #2
RE: MPPs v21 clone
(03-08-2017, 09:29 AM)itrescuer Wrote:  I have brought mppsv21
Working well with can bus . boot mode and multi boot. But Kline not stable . dose some one have schematics for this clone
I will attach v21 software if some one provide schematics

for better k-line try to replace L9637 chip with hq one..picture I have only this.. under


Attached Files Thumbnail(s)
       
Reputation: +3 - ROD-BENDERS [+1] , Remap Ross [+1] , kila68 [+1]
Quote this message in a reply
[+] 12 users say Thank You to rs@chip for this post
23-08-2017, 02:30 AM, (This post was last modified: 23-08-2017, 02:31 AM by obdtool.)
Post: #3
MPPS v21 PCB Schematics
Yes, agree with alex.eobd2
actually, it's MPPS V18 PCB Schematics, but also applies to MPPS V21


Attached Files
MPPS PCB Schematics.txt
File Type: .txt
Downloaded: 250 times
Size: 64 bytes

Reputation: +2 - ROD-BENDERS [+1] , maxeugen1 [+1]
Quote this message in a reply
[+] 14 users say Thank You to obdtool for this post
23-08-2017, 03:25 AM,
Post: #4
RE: MPPs v21 clone
My MPPS v21 is coming in as well. I will update if there is any k-line instability.
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
26-09-2017, 21:37 PM, (This post was last modified: 26-09-2017, 22:34 PM by Enabled.)
Post: #5
RE: MPPs v21 clone
I received my V21, and I only use it with V18 software, because of V21 software problems...

It does not connect to any K-line (EDC15 VW Bora TDI) or any CANBUS (Mercedes Sprinter 3.0 CRD V6 EDC16).
It says ecu not found after trying to communicate for 15 seconds.
Tricore with breakout not working either.

Any ideas what I can check? My interface and software communicate correctly. My interface looks 100% like the one in post 1.

I did not even get to use it one time.

"ECU Not Found" on everything.
Quote this message in a reply
27-09-2017, 04:24 AM,
Post: #6
RE: MPPs v21 clone
(26-09-2017, 21:37 PM)Enabled Wrote:  I received my V21, and I only use it with V18 software, because of V21 software problems...

It does not connect to any K-line (EDC15 VW Bora TDI) or any CANBUS (Mercedes Sprinter 3.0 CRD V6 EDC16).
It says ecu not found after trying to communicate for 15 seconds.
Tricore with breakout not working either.

Any ideas what I can check? My interface and software communicate correctly. My interface looks 100% like the one in post 1.

I did not even get to use it one time.

"ECU Not Found" on everything.

HI,
my v21 ( software v18 )also has the same problem.
Quote this message in a reply
27-09-2017, 06:38 AM,
Post: #7
RE: MPPs v21 clone
(26-09-2017, 21:37 PM)Enabled Wrote:  I received my V21, and I only use it with V18 software, because of V21 software problems...

It does not connect to any K-line (EDC15 VW Bora TDI) or any CANBUS (Mercedes Sprinter 3.0 CRD V6 EDC16).
It says ecu not found after trying to communicate for 15 seconds.
Tricore with breakout not working either.

Any ideas what I can check? My interface and software communicate correctly. My interface looks 100% like the one in post 1.

I did not even get to use it one time.

"ECU Not Found" on everything.
Buy v18.V21 not working properly .
Quote this message in a reply
27-09-2017, 07:09 AM,
Post: #8
RE: MPPs v21 clone
I bought V18, but I got V21 (so written on the device) with v18 software.
The seller offered to send a new type to replace myself biggrin
Quote this message in a reply
27-09-2017, 07:39 AM,
Post: #9
RE: MPPs v21 clone
Send to seller and buy v18_1.08.21
Quote this message in a reply
27-09-2017, 09:07 AM, (This post was last modified: 27-09-2017, 09:08 AM by yellowstilo.)
Post: #10
RE: MPPs v21 clone
I had the same problem with my MPPS v18 (with V21 sticker !) - it dit not connect to any ecu (ecu not found) but it worked ok on V21 software , i expected it to block after aprox. 10 read-write cycles but after aprox. 18 cycles it's still working ok....
I still keep in mind i can be blocked any moment but for now it works ok on V21 !
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
0Engine OriginaL/Clone PCMFLASH Questions/Answers volavka 130 48,231 2 hours ago
Last Post: ROD-BENDERS
  Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? ROD-BENDERS 127 17,093 Today, 02:10 AM
Last Post: weinerbarn
  renault trafic3 clone ecu Albert-M 2 50 26-03-2024, 11:47 AM
Last Post: JV22
  MED17.5.2 Clone problem 3inferno3 8 230 18-03-2024, 15:07 PM
Last Post: 3inferno3
  Ecu clone stjansdal 13 265 24-02-2024, 10:38 AM
Last Post: stjansdal
  read sid310 pcm tool clone help manueldord 5 274 12-02-2024, 21:31 PM
Last Post: manueldord
  EDC17CP54 Amarok clone sejoharun 2 147 10-02-2024, 11:33 AM
Last Post: sejoharun
ZTAudi Edc17cp14 clone audi guciek 3 138 07-02-2024, 11:52 AM
Last Post: amaflo
  Solved ✔ Volvo V50 clone al70 13 405 22-01-2024, 16:04 PM
Last Post: al70
XZBMW Solved ✔ BMW E90 EDC17c06 clone help Durba 10 585 05-12-2023, 19:46 PM
Last Post: Durba

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content