[tukan]

Hello guys.

I´m going to retrofit adaptive LED Headlights on my 2010 F10
VIN: WBAFW71090C895869
It seems to be difficult, but possible.
I think there are some modules need to be changed and some wiring done.
Can someone help what exactly need to be done??

Thanks a lot.

[duckdonald]

Do you have to replace:
ZGW
FRM
And wiring k-can3 and powering the headlights.
New ZGW is not compatible with cic pro. (No optics). Replace with NBT.
And modify wiring to central console keys.

[tukan]

Can you tell me whats the part number of the modules I have to get?
Can I use second hand module or do they have to be new?
Anyone have wiring instructions??

I've seen people retrofit without replacing with NBT. There must be the way for that.

[Bavar545]

Do you have to replace:
ZGW
FRM
And wiring k-can3 and powering the headlights.
New ZGW is not compatible with cic pro. (No optics). Replace with NBT.
And modify wiring to central console keys.

Don`t need to replace NBT.....

---

Can you tell me whats the part number of the modules I have to get?
Can I use second hand module or do they have to be new?
Anyone have wiring instructions??

I've seen people retrofit without replacing with NBT. There must be the way for that.

ZGW-61359322532
FRM-61356823587

[tukan]

Do you have to replace:
ZGW
FRM
And wiring k-can3 and powering the headlights.
New ZGW is not compatible with cic pro. (No optics). Replace with NBT.
And modify wiring to central console keys.

Don`t need to replace NBT.....

---

Can you tell me whats the part number of the modules I have to get?
Can I use second hand module or do they have to be new?
Anyone have wiring instructions??

I've seen people retrofit without replacing with NBT. There must be the way for that.

ZGW-61359322532
FRM-61356823587

Thank you for confirming the fact that you do not need to exchange for NBT.
Exactly the same numbers I got from someone come out that is right
Need still information where the cables are to be reached and connected where and what is to be encoded ??

Thank you very much for your help

[limur]

Zgw can leave the old one. But a new one is needed to activate the light

[tukan]

Zgw can leave the old one. But a new one is needed to activate the light

In my 2010 ZGW was to old to handle the LED lights. Hardware is to old. It must be the module from the facelift model.

[bmwbmw]

Must buy ZGW with 8SK and new FRM,do wirring some coding and all will be fine for sure

[tukan]

Must buy ZGW with 8SK and new FRM,do wirring some coding and all will be fine for sure

It doesn't have to be 8SK. It depends what year is yours. 8SK doesn't have MOST connection for CIC and because I need it I purchased ZGW-02 High Plus.

[rinaprasant]

i done 3 car in past , but i have one car all ok , in e-sys all 4 mocule dected coding add 552 in frm but only turn single working & when i drive led working but in normal no ring no head light
what to do please tell me

thanks