[tukan]

i done 3 car in past , but i have one car all ok , in e-sys all 4 mocule dected coding add 552 in frm but only turn single working & when i drive led working but in normal no ring no head light
what to do please tell me

thanks

Have you done LED initialization in ISTA-D/ISTA+ ??

[rghelase2001]

Hi,
Trying to help a friend in retrofitting LED lights in a pre-LCI F01 2011.
We replaced the FRM and ZGW.
Which are the FDL coding necessary to do, in order for High Beam Assist to work with KAFAS1? (and not KAFAS2)..

[jb2005]

Try to code C_HBA_ADAPT_SHUT_ENA to werte=00 (FRM)

[rghelase2001]

Try to code C_HBA_ADAPT_SHUT_ENA to werte=00 (FRM)

It does not work... Have you done the same retrofit?
Is there any other FDL coding needed in FRM, for the KAFAS1 camera to work with the new FRM and ZGW, for LED retrofit in the F01 pre-LCI?

[jb2005]

Try to code C_HBA_ADAPT_SHUT_ENA to werte=00 (FRM)

It does not work... Have you done the same retrofit?
Is there any other FDL coding needed in FRM, for the KAFAS1 camera to work with the new FRM and ZGW, for LED retrofit in the F01 pre-LCI?

Did you manage to fix this?

[hero3838]

Are you sure before 09/2010 zgw2 works?
I think also need to replace cas because of zgw2 doesn't work with old cas break pedal message does not transmit to flex ray line. As you know nbt retrofit to before 09-2010 f10 series

[Mwahab]

With all due respect, what are you saying all of you is not the key solution for this retrofit.

[jb2005]

With all due respect, what are you saying all of you is not the key solution for this retrofit.

Would you enlighten us since you seem more knowledgeable? The spirit of the forum is to be constructive and informative.