Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Retrofit LED Headlights on pre-LCI F10
11-04-2018, 05:58 AM,
Post: #11
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
(08-04-2018, 09:01 AM)rinaprasant Wrote: i done 3 car in past , but i have one car all ok , in e-sys all 4 mocule dected coding add 552 in frm but only turn single working & when i drive led working but in normal no ring no head light Have you done LED initialization in ISTA-D/ISTA+ ?? |
|||
22-03-2019, 07:28 AM,
Post: #12
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
Hi,
Trying to help a friend in retrofitting LED lights in a pre-LCI F01 2011. We replaced the FRM and ZGW. Which are the FDL coding necessary to do, in order for High Beam Assist to work with KAFAS1? (and not KAFAS2).. |
|||
22-03-2019, 14:31 PM,
Post: #13
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
Try to code C_HBA_ADAPT_SHUT_ENA to werte=00 (FRM)
|
|||
26-03-2019, 19:49 PM,
Post: #14
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
|
|||
09-04-2019, 12:20 PM,
Post: #15
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
(26-03-2019, 19:49 PM)rghelase2001 Wrote:(22-03-2019, 14:31 PM)jb2005 Wrote: Try to code C_HBA_ADAPT_SHUT_ENA to werte=00 (FRM) Did you manage to fix this? |
|||
09-04-2019, 22:37 PM,
Post: #16
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
Are you sure before 09/2010 zgw2 works?
I think also need to replace cas because of zgw2 doesn't work with old cas break pedal message does not transmit to flex ray line. As you know nbt retrofit to before 09-2010 f10 series |
|||
11-04-2019, 01:45 AM,
Post: #17
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
With all due respect, what are you saying all of you is not the key solution for this retrofit.
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
11-04-2019, 08:23 AM,
Post: #18
|
|||
|
|||
RE: Retrofit LED Headlights on pre-LCI F10
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content